|
[China]
Trade Verify
Address: No.117 Fengshen Avenue, Xiuquan Street, Huadu District, Guangzhou,China
Contact name:Jacky
Guangzhou Ruihe New Material Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Condensation RTV 2 Liquid Silicone Rubber for Mould Making
High Strength Translucent RTV 2 Liquid Silicone Rubber for Mould
Making
Rui-He 5150 Series is Low viscosity Silicone Rubber are suitable
for a wide variety of application areas – in the mold making
products including ice cream mould, fondant mold ,ice mold,silicone
cracker molds, Pathmate stone mold,cornices, balustrades,
fountains,decorative garden articles,decorative stone molds,gypsum
sculpture.
Suitable for producing high transparent & high precision
silicone rubber mold.
| Appearance | Viscosity Pa.s | Hardness | Tear Strength KN/m | Rebound % | Tensile strength Mpa | Linear shrinkage % | |
| RH5150-20ST | Translucent | 7000 | 20 | 12.5 | 45 | 5.2 | 1.7 |
Product should be stored at or below 30°C (86°F) in original, unopened containers. Use it within 12 months from the day of manufacture.
As an innovative silicone company, we always pay attention to the balanced development of economic, ecological and social goals. We use the advanced and scientific management concept to establish the "Ruihe" brand and buid a Chinese silicone intergrated solid silicone rubber and liquid silicone rubber, First-class enterprise.
1. What's silicone products you are making?
--liquid silicone rubber, silicone rubber, silicone oil; Platinum agent: -- According to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team. --Each batch of silicone rubber must be tested by our safe quality examination system.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
1, Please choose the right liquid silicone according to your products.
2, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
3, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices in website because prices fluctuate for many reasons.
