|
[China]
Trade Verify
Address: No.117 Fengshen Avenue, Xiuquan Street, Huadu District, Guangzhou,China
Contact name:Jacky
Guangzhou Ruihe New Material Technology Co., Ltd |
|
Verified Suppliers
|
|
|
RH-PSA Film and Tape Product Material Solution Product Introduction Characteristics: primary adhesion and adjustable (1~1200g / 25mm) To meet the specific application needs of customers, silicone pressure sensitive adhesive (RH-PSA) can be prepared into products ranging from ultra-low adhesive (1 g / 25 mm) to high adhesive (> 1200g / 25mm).
In polyester (PET) film substrate application, compared with ordinary organic pressure sensitive adhesive (Organic PSA), RH-PSA silicone pressure sensitive adhesive has the following advantages:
● Excellent wetting exhaust: protective film can quickly infiltrate and fit; self-adhesion, reliable low adhesion, can be suitable for repeated adhesion;
● Long-term adhesion stability;
● Higher optical transmittance, no yellowing phenomenon; low viscosity, fluidity; high solid content,
● Low VOC Application: protective tape / film field. 10-59
| Appearance | Viscosity Pa.s | Non-Volatile Content | Adhesive | Application | |
| RH-PSA 600 | Transparent | 15000-25000 | 58-62 | 600-700 | Electronic and industrial component surface protection, protective film/process protection tape |
Certification
1. 20kg barrel one set A+B part 40kgs
200kg barrel one set A+B part 400kgs
2. It is available in 20kg pails and180kg drums.
As an innovative silicone company, we always pay attention to the balanced development of economic, ecological and social goals. We use the advanced and scientific management concept to establish the "Ruihe" brand and buid a Chinese silicone intergrated solid silicone rubber and liquid silicone rubber, First-class enterprise.
1. What's silicone products you are making?
--liquid silicone rubber, silicone rubber, silicone oil; Platinum agent: -- According to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team. --Each batch of silicone rubber must be tested by our safe quality examination system.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
1, Please choose the right liquid silicone according to your products.
2, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
3, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices in website because prices fluctuate for many reasons.
