|
[China]
Trade Verify
Address: Room 2614-2615,Block B,No. Longyang Time Square,Hanyang District,Wuhan,China
Contact name:Yang
HUBEI CHENGLI SPECIAL AUTOMOBILE CO,.LTD |
|
Verified Suppliers
|
|
|
6mt isuzu road cleaning truck 6ton vaccum road sweeper truck for Cambodia
Product Description
1. Purpose: road cleaning truck also named as road cleaning truck is a new high-efficient sweeping equipment which has multi-functions like road washing,sprinkling,garbage collecting and transportation...Sweeper truck can be widely used in main city road,airport road,residential area road,park,terminal,square,cement factory,power plant and etc.
2. Main parts: stainless garbage bin,water tank,Italy hydraulic oil pump,germany magnetic valve,french Schneider eletronic control unit,auxiliary engine,suction panel,sprinkler system,brush.
3. Struture of road cleaning truck:two sweeping brushes in middle+wide suction nozzle and high pressure sprinker nozzles in middle+high pressure sprinkler nozzle at left and right side".
4) road cleaning truck adapts Interligent one-key control technology,all operations are completed in the cabin.
5) On the basis of one-key control technology, the manual throttle control system of the auxiliary engine is added, which can independently adjust the throttle size according to the road condition, effectively enhancing the cleaning effect and reducing fuel consumption.
6) As many as 16 voice prompts and music alarm can broadcast of various safety tips and failure points accurately.
Specifications of 6mt isuzu road cleaning truck 6ton vaccum road sweeper truck for Cambodia
| Cabin | Driving type 4x2 LHD single row,with A/C ,with two seats,audio with USB, | |||||||||||
| Vehicle Main Dimensions | Overall dimensions (L x W x H)mm | 7600×2300×2700 | ||||||||||
| Wheel base (mm) | 4175 | |||||||||||
| Wheel track (front/rear) (mm) | 1680/1650 | |||||||||||
| Approach/Departure angle(°) | 17/12 | |||||||||||
| Weight in KGS | Tare Weight | 7420 | ||||||||||
| payload | 2440 | |||||||||||
| Front axles loading capacity | 1x3360 | |||||||||||
| Rear axles loading capacity | 1x6695 | |||||||||||
| Max. driving speed(km/h) | 110 | |||||||||||
| Engine | Brand | ISUZU | ||||||||||
| Model | 4HK1-TCK40 | |||||||||||
| Horse Power(HP) | 189 | |||||||||||
| Emission standard | EuroV | |||||||||||
| Gearbox | 6 forwards & 1 reverse | |||||||||||
| Steering | left hand drive | |||||||||||
| Tire | 8.25-16,6 tires with one spare | |||||||||||
| Max. Cleaning Width | 3M | |||||||||||
| Sweeper Speed | 3~20 km/h | |||||||||||
| Max. Cleaning Capacity | 60000 m2/h | |||||||||||
| Max. Suction grain size | ≥110mm | |||||||||||
| Dumping angle | ≥45° | |||||||||||
| Hopper | 5000liters,double layer,Stainless steel inside | |||||||||||
| Water tank | 6000Liters | |||||||||||
| Auxiliary Engine | Model&Manufacturer | JIANGLING JX493ZQ | ||||||||||
| Type | Four-injection,water-cooling,turbo-charged,diesel engine | |||||||||||
| Power | 77hp/3600r/min | |||||||||||
| Max. Rotation Speed | 2400r/min | |||||||||||
| Oil type | 0# Diesel,share the same fuel box with chassis | |||||||||||
| Aerator | Type | High pressure centrifugal Aerator | ||||||||||
| Curb rotation speed | 2600-2900r/min | |||||||||||
| Driving model | Driven by auxiliary engine and transferred by transmission parts,clutch and belts | |||||||||||
| Hydraulic System | Type | electro-hydraulic Centralized Control | ||||||||||
| Main parts | Gear pump,gerotor motor,hyraulic oil cylinder,magnetic valve,manual pump | |||||||||||
| Overflow pressure | 14MPa | |||||||||||
| Hydraulic oil type | L-HV46(when temperature is 30℃-5℃) L-HM46(when temperature is 5℃-40℃) | |||||||||||
| Hydraulic oil box | 70L | |||||||||||
| Water sprinkling | Main parts | Water pump,water filter,sprinkler,water box | ||||||||||
| Electrical system | Con-structure | Two batteries(in series) | ||||||||||
| Voltage | 24V | |||||||||||
| Battery model | 12-80A.H | |||||||||||
| Sweeping System | Type | Fours brushes installed between front and rear axle,driven by gerotor motor. Left and right brushes are controlled to lift up and down separately. Rear brushes and suction nozzle are gang controlled for up and down. | ||||||||||
| Sweeper Diameter | 900mm | |||||||||||
| Sweeper rotation speed | 80r/min | |||||||||||
| Sweeper angle adjustment | Forerake 4°-6°and extroversion 2°-4° | |||||||||||
| Suction Nozzle | Type | U-shaped | ||||||||||
| Nozzle diameter | 200mm | |||||||||||
| Nozzle ground clearance when operation | 5-10mm | |||||||||||
Quick feedback to solve your questions
Professional engineering and production team
Related Accessories and spare parts offered,no future worries
Regular customer after-sale visiting
Free technical staff training and guidance
Reasonable price and good quality
Quick delivery and shipment
FAQ
Q1: What kinds of sweeper trucks I can order from your company?
A: There are various sizes of sweeper trucks with different
functions,you can contact us and tell your request.We will
recommend you suitable product.
Q2:: Have you supplied sweeper products to any overseas companies?
A: Yes,with need of cleaning cities,we offered sweeper trucks to
many Africa and south-east Asian countries.
Q3 What about warranty?
A: Equipment warranty is 12 months from the date on which the
equipment is applied successfully into operation, or 13 months from
the date on which the equipment has been delivered, whichever comes
first.
Q5: Where is your factory? How far from Shanghai to your factory?
A: Our factory based in Suizhou city, Hubei province, China. Our
overseas marketing office in Wuhan. Wuhan is two hours' plane from
Beijing,Shanghai or Guangzhou city,welcome to visit us for factory
inspection.
