High efficiency 100% new Demolition Excavator Long Reach Boom For mini excavator ZX60, PC120, CAT316
Catalogue ZH excavator boom arm.pdf
Description of Excavator Demolition Boom
1. There are two types of excavator demolition boom can be chosen.
One is two-section. Another one is three-section.
2. Long reach arm boom ensures a larger operation area.
3. We use Q690 material to make excavator demolition boom which
enhances the wear resistance.
4. Demolition boom is easy installed and operated.
5. The pipes are excellent design to avoid the damage.
category | model | length | weight |
boom | 6-8T | 8-11M | 700 |
arm | | | 390 |
boom | 10-16T | 10-14M | 1400 |
arm | | | 800 |
boom | 12-16T | 15M | 1500 |
arm | | | 900 |
Combination proposal for excavator demolition attachments
Material: The sheet material is Q355B(Q690D optional), the hydraulic steel
pipes are Cold drawn seamless steel pipe, the pin material is 40Cr,
the high pressure hose is joint venture pipe with 4 layers of wire
coil, the butter pipe is single-layer hose, and the bushing into
the large arm base is graphite alloy copper sleeve.
Configuration:1pcs boom,1pcs middle arm,1pcs arm, 8pcs pins, 12 stop valves, 1pcs
bucket cylinder(20t level), all high pressure hoses, 1 kit Linkage.
Product advantages: the size of the large and medium arm designed by our company is
reasonable, the demolition arm can rotate normally after installing
the crushing hammer, the large and medium arm can achieve 180
degrees of open Angle, and the overall removal height will be
higher. The overall production process is ahead of the average
level of the industry, and the quality of the products is better
than that of the same grade.
Advantages of long reach demolition for excavator
1. Applicable for all the make and model of the excavator.
2. Many different materials such as Q345B, and Q690D are optional
to suit your application.
3. Big boom can be two jointed pcs to make it fittable into a
container to save shipping costs.
4. All the seams are 45 degrees tapered before welding.
5. All parts have a warranty
6. Some parts can be consolidated using a thicker plate or
overlapping another plate for heavy-duty application.
7. The boom cylinder and arm cylinder can also be supplied if the
customer wants.
8. Extra pipelines can be added to suit some extra applications.
9. The conventional material is Q355B. The plate is thin, high in
strength, and light in weight, and reduces the load of the
excavator.
10. The bushing in the boom seat cover is made of copper (with
self-lubricating carbon powder inside to extend the life of the
long arm).
Recommended Excavator Attachments
1. Long reach excavator boom
2. Excavator telescopic boom
3. Demolition boom
4. Excavator rock bucket
5. Excavator tilting bucket
6. Hydraulic grabs for excavators
COMPANY PROFILE
CERTIFICATIONS
TOP PICKS