Important Quality Control
* Follow IEC60601 Safty Standard
* American motor, with UL/ROHS/EN approval. Noise under 50dB, with
lifetime 20,000times movement.
* Motor protection:
* The elevators are equipped with electric protection against
overload, therefore the bed will automatically stop when an
elevator is overloaded.
* Once the overload is removed, the bed can continue to work
without interference.
* One-button emergency stop switch can quickly stop all going
movement
* Use the GO button to activate the bed; protects the patient
against an injury caused by any unintentional movement of the
bed.Control system is automatically locked after 3 min
* The designed guardrail fully considered to provide enough space
and hand grasp for patient to get out of bed, and provide extremely
high safety.
* Two steps unlocking system,to prevent patients from accidentally
lowering the guardrail (patented design).
* NURSE CONTROLS WITHIN REACH
* Clear and easy to use controllers which is at the patient’s
disposal
* Auto-Regression 10+6 cm
* When repositioning the backrest and thigh rest, the Y6Y8C makes
the back plate retreat 10cm and the thigh plate retreats 6cm so to
minimises the pressure and shear forces in the patient‘s pelvic
region. This results in a significant reduction in the development
of pressure ulcers.
* Respects easy patient mobilisation:
* One-button for patient mobilisation position -back plate raised,
double hole design on back part guardrail, which supports
patient self standing
* CPR emergency reset handle to immediately flatten the bed back
part; located on both sides of the bed.
* Electric CPR button is setted inside control panel and nurse
control panel,one button to make the back plate flat.
* One button nursing operating position: 800mm, helping the nurse
to give fast treatment in a very comfortable height
* The lowest position indicator design allows the medical staff to
observe the bed safe position during night or long distance; green
light indicate lowest bed height
* Backrest adjustment
* Thighrest adjustment
* Auto-contour
* Height adjustment
* Bed extension
* X-Ray translucent bed surface
* Auto-regression
* Cardiopulmonary resuscitation
* Controls in the siderails: Numerous studies have shown that the
built-in controller located in the head guardrail is easier to
reach, allowing the patient to adjust the basic position of the bed
through the controller. (optional)
* Handheld controller for patients and nurses, ergonomic design.
Built-in LED torch, backlit keyboard design for night use
* Satellite control panel for nurse: flexible spiral cable for easy
mobility and operation in optimal position. The nurse can
control all standard functions and automatic chair position. This
panel is an optional accessory.
* Patented design Detachable head & foot board, using the
eccentric locking structure, one step quick removable
* Horizontal corner bumpers at the outermost periphery of the bed
to protect the bed and wall
* Patent angle indicator,clearly show back-rest
* extended bed platform up to 20CM, comfortable for the tallest of
patients (option)
* JOINT-FREE TECHNOLOGY
* Removable plastic covers formed from 9 removable blow moulded
lamella to minimise the slots where unwanted infections may hide.
* 5th and 6th extra side rail, for 100% fully protection(option)
* Castors with TPR tire, no worn-out after running 30KM, united
forming without bolts
* Pass Dynamic test: Bearing 120kg run 30KM and pass obstacles
500time
* Plastic drainage hook, movable
