Shanghai Liangjiang Titanium White Product Co., Ltd. |
Specifications:
Liangjiang brand- Chemical Fiber Titanium Dioxide For Urethane Elastic Fiber , The high-quality product is produced by adopting the improved
production method of LJ-A300 Chemical Fiber TiO2 in accordance with German technological process, and is
primarily used as matting agent in urethane elastic fiber
manufacturing.
Typical technical data sheet( standard: Q/VAIP-2010)
Item | Index | Analysis result | ||
Appearance | White Powder | White Powder | ||
purity(TiO2)% ≥ | 93.0 | 94 | ||
Fe% ≤ | 0.010 | 0.005 | ||
Water % ≤ | 1.0 | 0.36 | ||
PH | 6.5-8.0 | 7.5 | ||
45μmresidue on sieve % ≤ | 0.03 | 0.02 | ||
Loss on ignition % (m/m) ≤ | 0.2 | 0.15 | ||
Grain size | 0.2-0.3 | 0.22 | ||
Resistivity Ω/cm ≥ | 7000 | 10000 | ||
Penetration amount | Normal | - | 100% | |
Heat up | - | 100% | ||
Filter performance testing ba | 3.0-4.0 | 0.36 | ||
Interface sedimentation test | Non-delamination | Non-delamination | ||
Non-sedimentation | Non-sedimentation | |||
Bene-dispersion | Bene-dispersion | |||
Hue | L(Brightness) ≥ | 96 | 98.57 | |
a(Red hue) ≤ | 0.3 | -0.33 | ||
b(Yellow hue)≤ | 0.4 | 0.32 | ||
Packing: Conventional packing of chemical fiber titanium dioxide is 25kg net
weight/bag or 1000kg per pallet.
Transportation: In transportation, chemical fiber titanium dioxide should be kept
dry and free from exposure to rain. Combined shipment with goods
that may deteriorate its quality or damage the packing is strictly
prohibited. Ensure product safety and packing cleanliness during
transportation.
Storage: In storage, chemical fiber titanium dioxide should be kept
dry, ventilated and free from exposure to light, and is preferably
kept indoors or in a place with a canopy. The storage site should
be kept clean and free from exposure to sunlight, moisture and
rain. The validity period is 3 years as of the date of production.
Upon the expiration of the validity period, the product is subject
to re-inspection of all items and approval before it is used.
Description:
Titanium dioxide fiber grade have the basic features of white
pigment, the special request for particle size, particle
distribution, whitness, impurity contents and so on.
1. The refractive index contrast between white pigment and synthetic fiber:
White pigment | refractive index | Synthetic fiber | refractive index |
Tio2( anatase) | 2.55 | Polyester | 1.725 |
Tio2(rutile) | 2.76 | polyacrylonitrile | 1.515 |
Barium sulfate | 1.64 | Acetate | 1.37 |
Zinc oxide | 2.02 | viscose | 1.546 |
antimony oxide | 2.19 | Ketone ammonia | 1.572 |
Zinc sulfide | 2.37 | Nylon-6 | 1.558 |
lithopone | 1.84 | Nylon-66 | 1.558 |
Tio2, high opacity, One of the most basic characteristics of good
white pigments. Opacity is caused by refractive index difference
between pigments and the surrounding mediums.
When refractive index of pigments and the refractive index of
binder the same, shows transparent; When refractive index of
pigments is greater than the refractive index of blinder, it is
opaque, the larger difference, the stronger opacity.
The sheet shows the refractive index of pigments is higher than of
general white pigments,two times as the refractive index of common
synthetic fiber, besides, small particle size, good dispersibility,
stable chemical properties, so putting 0.2% to 0.5% tio2 into the
synthetic fiber can reach the flatting effects.
2. The cost of tio2 using in fiber is about 1%, the using of tio2
fiber grade is not like of the coatings. Using in coatings, if not
good whiteness, matching color to remedy. If bad fitness, grinding
repeatedly. If the bad quality of tio2 as Flatness, it will
immediately cause the filter at a slower pace, and blockage of the
jet hole, broken wires, hair silk, bad appearances of the fibers
and so on. Liangjiang brand- titanium dixoide fiber grade, fine
particles, almost no coarse particle, narrow particle size
distribution and uniform, good dispersibility, and less impurity
content, When using, not wear pipe, nozzle and wire cutting
knife;Chemical stability, heat resistance, good resistance to light
easy dispersion in bulk, fiber, and scattered and good stability,
small filter resistance;After the extinction , not affects the
strength of the fiber and spinning processing, once the sample
passes the test, we can ensure the quality stability.
we aspires to be the supplier of the world's leading chemical
raw materials, show our value of the products made in China!