|
[China]
Trade Verify
Address: Weinan High Technology Development Zone, Shaanxi ,China
Contact name:Amy
TID POWER SYSTEM CO ., LTD |
|
Verified Suppliers
|
|
|
Customized Epoxy Fiberglass Rod For Composite Insulator/Fuse Cut
Out
Product:
1.Product Description of green or brown epoxy fiberglass rod for
composite insulator/fuse cut out applications:
Fiberglass Cord Rod is made through glass fiber yarn soaking in
epoxy compound glue,and passing the vacuum injection, continuous
pulling and pressing, and being solidified.They have good
insulation performance and tension strength.FRP rod are widely used
for high voltage line,freeway; tunnel; railway station; underground
engineering;sewage treatment plants etc.
Fiberglass rods have many advantages, including high strength,
lightweight, and corrosion resistance2. Features and Application of fiberglass rods:
Technical Parameters:
| No. | Technical specification | Unit | value |
| 1 | Density(20℃±2℃) | g/cm3 | ≥2.2 |
| 2 | Water absorption rate (20℃±2℃,24h) | % | ≤0.05 |
| 3 | Tensile strength | Mpa | ≥1200 |
| 4 | Bending strength | Mpa | ≥960 |
| 5 | Dye penetrated test | Min | ≥15 |
| 6 | Water diffusion test (1%NaCl, 100h 12kv/1min) | mA | ≤0.1 |
| 7 | Shearing strength along laminas | Mpa | ≥50 |
| 8 | Volume resistivity (140℃,96h) | Ω.M | ≥1010 |
| 9 | DC withstand voltage (10mm) | Kv | ≥50 |
| 10 | Lighting impulsed withstand voltage (100kv,10mm) | Times | ≥5 |
| 11 | Bending strength at heating conditions | Mpa/150℃ | ≥350 |
| 12 | Torsion strength | Mpa | ≥800 |
| 13 | Stress corrosion (1mol/1HNO3,at 67%stress) | h | 96 |
3. More detail information for customized epoxy resin
fiberglass rod for composite insulator fuse cut out surge arrester
1 - Continuous roll of reinforced fibers/woven fiber
mat
2 - Tension roller
3 - Resin Impregnator
4 - Resin soaked fiber
5 - Die and heat source
6 - Pull mechanism
7 - Finished hardened fiber reinforced polymer
Support and Services:
We provide technical support and services for Insulator Fittings/
Fiberglass Rod/ Rubber. Our technical support team can answer any
questions you may have about these products. They can provide
advice on installation, troubleshooting, and maintenance. We also
offer a warranty on all our products. If any of our products fail
due to manufacturing defects, we will replace them free of charge.
Finally, we are always available to answer any additional questions
you may have.
Packing and Shipping:
Insulator Fittings/ Fiberglass Rod/ Rubber Packaging and Shipping:
Insulator Fittings: Packaged in cardboard boxes, wrapped in plastic
wrap and secured with tape.
Fiberglass Rod: Wrapped in plastic bubble wrap and placed in
cardboard boxes.
Rubber: Placed in cardboard boxes lined with plastic wrap.
All items will be shipped via UPS or other courier services.
