Primary AA 3.6V 2500mAh ER14505 Battery for smart parking,
in-ground sensor, tracking device
International Standard | AA | Nominal Capacity(mAh) | 1600 |
Max Size(mm) | Φ14.5×50.5 | Standard Discharge Current(mA) | / |
Weight(g) | 20 | Max Continuous Current(mA) | 20 |
Nominal Voltage(V) | 3.6 | Max Pulse Current(mA) | 100 |
1. Features and Benefits
Nominal voltage up to 3.6 V
Energy density up to 590
Wh/kg
More than 90% of the
capacity could be output at a stable voltage
- Wide Operating Temperature Range
-55°C to +85°C
elf discharge rate is less than
2% per year at room temperature
Glass-to-metal seal
Bobbin and spiral structure is
available for different applications
2. Applications
Well pressure meters in high
temperature, float meter, logging while drilling (LWD), measure
while
drilling (MWD)
Diesel cylinder inspection
devices
Temperature detector
- Military and other applications in high temperature
3. General Safety Instructions
- The battery should be stored in dry environment.
- Do not continue to use the battery if abnormal heat release or
leakage occur.
- Please read the manual before using our battery.
- Keep out reach of children. If swallowed, contact a physician at
once.
- Do not reverse battery, follow strictly the signs + and – shown on
batteries and appliances. If batteries are put in the wrong way
they are bound to become hot very quickly. This can lead to gas or
toxic material leakage and/or to a violent rupture.
- Do not incinerate of mutilate, may burst or release toxic material.
- Do not deform batteries. Batteries are not to be crushed, drilled
into or damaged in any other way. This can lead to toxic material
or gas leakage and/or violent rupture.
- Do not short circuit. If positive(+) and negative(-) polarity of a
battery is directly connected this may cause a short circuit, e.g.
This may happen in case of keys or loose coins in pockets. This can
lead to toxic material or gas leakage and/or violent rupture.
4. Advantages
- High energy density, double that of premium alkaline batteries
- Low weight
- High cell voltage
- Flat discharge characteristic
- Low self discharge
- Very long shelf life
- Very long operating life
- Wide operating temperature range
- Excellent durability
- Small cell size
5. Characteristics
Lithium Thionyl Chloride (Li-SOCl2) battery has high energy
density, and its nominal voltage is 3.6V. Bobbin structure is best
suited for low current discharge and spiral structure is best
suited for high current discharge.
Principle and Reactions:The positive active material of Li-SOCl2
batteries is liquid Thionyl Chloride (SOCl2) and negative active
material is Lithium (Li).
6. General Safety Instructions
- Do not continue to use the battery if abnormal heat release or
leakage occur.
- Please read the manual before using our battery.
- Keep out reach of children. If swallowed, contact a physician at
once.
- Do not reverse battery, follow strictly the signs + and – shown on
batteries and appliances. If batteries are put in the wrong way
they are bound to become hot very quickly. This can lead to gas or
toxic material leakage and/or to a violent rupture.
- Do not incinerate of mutilate, may burst or release toxic material.
- Do not deform batteries. Batteries are not to be crushed, drilled
into or damaged in any other way. This can lead to toxic material
or gas leakage and/or violent rupture.