|
[China]
Trade Verify
Address: building A, No.6 huanping Road, Gaoqiao community, Pingdi street, Longgang District, Shenzhen 518117
Contact name:Cindy
Lu’s Technology Co., Limited |
|
Verified Suppliers
|
|
|
Model:
Nickel Metal Hydride Cylindrical Cell 1.2V 3000mah SC NIMH
Specification:
| Description | Specification | Conditions |
| Nominal Voltage | 1.2V | |
| Nominal Capacity | 3000mAh | Standard Charge/Discharge |
| Minimum Capacity | 2860mAh | Standard Charge/Discharge |
| Standard Charge | 300mA(0.1C) × 16 hrs | Ta=0～45℃ (see Note 1) |
| Rapid Charge | 1500mA(0.5C) ×2.1 hrs approx. (see Note 2) | (With -△V or dT/dt or TCO control) Timer CutOff =105% -△V= 5-10mV/cell dT/dt = 1～2℃/3min Temp. CutOff = 50℃ (122°F) Ta=10～45℃ |
| Trickle Charge | 90-150mA(0.03C-0.05C) | Ta=0～45℃ |
| Discharge Cut-off Voltage | 1.0V | |
| Maximum Discharging Current | 3000mA(1C) | Ta= -20℃～50℃ |
| Storage Temperature | -20℃～35℃ | Discharged state |
| Typical Weight(approximate) | 60.0 g |
NIMH Application:
MP3, Walkman, E-toys, E-tooth brusher, Brushes shaver, LED torch,
Alarm system, Fire
alarm, Mining light, Sex toys, Adult toys.
NIMH Features:
1) High energy density
2) Low self-discharge
3) Long service life
4) Chargeable up to 500 or 1000 times
5) Excellent performance of high rate charge and discharge
6) Low internal resistance
Quality guarantee period:
Guarantee time for one year due to the processing and raw material
defectiveness.
Suggestion: The products before delivery would be charged 20-80%
capacity according to the
transportation distance and packing condition. While checking the
capacity, please discharge
the battery at 0.2C to 1.0V/cell; then charge and discharge the
battery at by standard current.
If the storage time over 3 months or above, please discharge the
battery at the current 0.2C to
1.0V/cell, then charge the battery at 0.1C for 15 hours, after that
place for 20mins, discharge
the battery at 0.2C to 1.0V/cell. After this activation, check the
capacity by the standard
current charge and discharge the battery. The first time use
suggested to take standard
charge method to charge the battery to prevent from damage to
battery.
Notes:
1: Ta: Ambient Temperature
2: Approximate charge time from discharged state, for reference
only.
3: IEC 61951:2003 Cycle Life Test:
| Cycle number | Charge | Rest | Discharge |
| 1 | 0.1C×16hrs | None | 0.25C× 2hrs20mins |
| 2-48 | 0.25C× 3hrs10mins | None | 0.25C×2hrs20mins |
| 49 | 0.25C× 3hrs10mins | None | 0.25C× 1.0V/cell |
| 50 | 0.1C×16hrs | 1-4hr(s) | 0.2C×1.0V/cell |
| Cycles 1 to 50 shall be repeated until the discharge duration on any 50th cycle becomes less than 3hrs | |||
