Jiangxi Zhuokai New Energy Technology Co., Ltd. |
|
Large Capacity 25.6V/100Ah 3000W Portable Power Station For Home
Emergency Power Supply
The product is an smart storage battery with LiFeCoPO4 lithium-ion
batteries for mobile power pack.Ultra-high-power trolley box-type
portable power supply, stylish and beautiful, tow box design, easy
to carry and transport, fire-resistant and wear-resistant
insulating shell, to ensure the safety of electricity use.
Main Features:
1.A+ grade lithium iron phosphate battery, safe and reliable, long
life.
2.Large energy,Maximum power output 3000W, maximum energy 2560Wh.
3.Support various charging methods such as mains power, solar fast
charging, and car charging, which can provide outdoor
For uninterrupted power consumption.
4.Free telescopic pull rod, pulley drag, effortless, convenient
travel.
5.Multiple protection functions. Charging high voltage protection,
discharge low voltage protection, charging and discharging, over
current protection, high temperature protection, short protection.
reverse connection protection, ESD protection.
6.Excellent performance in Charging and discharging at large
current.3000W output power, all compatible with household
appliances.
Basic Characteristics
No. | Item | Spec |
1 | Cell | LiFeCoPO4 3.2V/100Ah |
2 | Array mode | 8S1P |
3 | Battery pack capacity | 100Ah |
4 | Energy capacity of battery | ≥2.56KWH |
5 | Output rating | 3kW |
6 | Input rating | 0.24Kw |
7 | Peak power | 3kW |
8 | USB interface (total output power) | 5V2A |
9 | Cigarette lighter interface (output) | 12V |
10 | AC interface (output) | 3kW |
11 | Charging time | 8-10h |
12 | Charge mode | Charger |
13 | Weight | 22kg |
14 | Product dimensions(L×W×H) | 550mm×305mm×203mm |
15 | Packaging size | Carton packing |
16 | Operating temperature | Charging: 0℃~55℃; Discharge: -10℃~55℃; |
17 | Storage temperature | 1 month: -20℃〜45℃ 1 year:0℃〜35℃ |
18 | Cell cycle life | ≥2500 times remaining 80% power |
19 | BMS system protection | Overcharge, overcurrent, overdischarge, overvoltage, overtemperature, overload, equalization, recovery, short-circuit protection |
Environmental Adaptability
1.Vibration Test
Testing Instruction:The battery will be vibrated 30 minutes in
three mutually perpendicular directions and changing frequency
between 10 to 55Hz. The rate of scanning frequency is from 10 Hz to
55Hz with the rate of 1Hz per min. Vibration frequency:10- 30Hz
Amplitude:0.38mm Vibration Frequency:30- 55Hz Amplitude:0.19mm.
Requirement:The appearance of the battery shall be free from
obvious damage and shall not be cracked, leaked, smoked or
exploded.
2.Temperature/ Humidity Test
Testing Instruction:Keep the battery at 40±2℃ and 90%-95%RH for 48
hrs after complete charge. After the test, keep the battery at
20±5℃ for 2 hrs. Discharge at 10A constant current discharge to the
termination voltage.
Frequency:Appearance of the battery shall not rust, smoke or
explode. Discharge capacity ≥80%.
3.High Temperature Performance Test
Testing Instruction:Keep the battery at a hot oven with 55±2℃ for 2
hrs, then measure the capacity with constant discharge current 0.5C
to discharge protection point after complete charge. After the
test, keep the battery at 20±5℃ for 2 hrs.
Frequency:Appearance of the battery shall not rust, smoke or
explode Discharge capacity >90%.
4.Temperature Performance Test
Testing Instruction:Keep the battery at -10±2℃ for 16-24 hrs, then
measure the capacity with constant discharge current 0.5C to
discharge protection point after complete charge. After the test,
keep the battery at 20±5℃ for 2 hrs.
Frequency:Appearance of the battery shall not rust, smoke or
explode Discharge capacity >55%.
Control Panel
1 Charging port
2 12V cigarette lighter output port
3 USB-QC 3.0 output
4 PV input port
5 12V output port
6 220V AC output ×2
7 AC power switch
8 Display
9 DC power switch
Physical Appearance Drawings
Storage Conditions
If the product is stored for a long time, please charge the battery
pack to about 60% of the electricity, put it in the dry and
ventilated place, and charge the charger for 3 hours (10A charge)
every 3 months.Batteries and chargers should be stored in clean,
dry and ventilated places. Avoid contact with corrosive substances,
away from fire sources and heat sources.
Battery Handling Precautions
1.Do not put the battery pack into the water or soak it!
2.It is forbidden to charge battery pack under fire source or
extremely hot condition. Do not use or store batteries near heat
sources (such as fire or heater). If the battery leaks or smells,
it should be removed immediately from the open flame. The first
time you use batteries, you need to charge the battery and use it
again!
3.Do not reverse the positive and negative!
4.Do not put the battery pack into the fire or heat the battery
pack!
5.No wires or other metal objects are allowed to short circuit the
positive and negative poles of the battery pack!
6.Do not pierce the battery pack housing with nails or other sharp
objects, and do not hammer or pedal the battery pack!
7.It is forbidden to pierce the battery housing with nails or other
sharp objects. No hammer or pedal batteries are allowed!
8.It is forbidden to put battery in microwave oven or pressure
vessel!
9.If the battery pack is out of smell, heat, deformation,
discoloration, or any other abnormal phenomenon, if the battery
group is being used or charged, it should be removed from the
appliance or charger immediately and stop using it!
10.You cannot use batteries in extremely hot environments, such as
in direct sunlight or hot days. Otherwise,the battery pack will
overheat, which will affect the performance and shorten the battery
life!
11.If the electrolyte drops into the eyes after the battery is
leaking, do not rub it. Rinse immediately with water and seek
medical help immediately. If you don't handle it in time, your eyes
will be hurt!
12.The ambient temperature will affect the discharge capacity. When
the ambient temperature exceeds the standard environment (25 + 5
C), the discharge capacity will be reduced!
13.If the battery pack has abnormal smell or abnormal sound during
charging, stop charging immediately.
14.If the battery has abnormal smell and abnormal sound during
discharge, stop discharging immediately.
15.If the above phenomenon occurs, please contact the manufacturer,
do not disassemble privately.