|
[China]
Trade Verify
Address: Floor 3-4, No. 6, Gaozeng Street, Renhe Town, Guangzhou, Guangdong, China 510470
Contact name:Bin Li
Guangzhou Yunyang Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
12V 50A Ac To Dc Waterproof Power Supply Battery Charger For Ecu Programming
Unlock the Power of ECU Programming with the 12V 50A AC to DC Waterproof Power Supply Battery Charger!
This versatile charger supports both lead acid batteries (including water-filled, gel, and AGM batteries) and lithium batteries (such as lithium iron, lithium manganese, and lithium ternary), ensuring compatibility with a wide range of battery types.
Efficient Multi-Stage Charging: With its automatic multi-stage charging curve, this charger optimizes the charging process for maximum battery lifespan. By delivering the right amount of current and voltage at each stage, it ensures that your batteries receive the ideal charging profile.
Intelligent Full Automatic Charging: This charger boasts intelligent full automatic charging capabilities. By accurately detecting the battery's status, it automatically switches between different charging modes, including charging standby, pre-charging, constant current, constant voltage, float charging, topping up, and reaching full charge.
Cutting-Edge Technology: With its APFC+LLC resonant half-bridge topology and MCU-controlled output current ramp-up, this charger delivers exceptional efficiency, stability, and energy-saving performance. The dual-control cooling fan system, which adjusts fan speed based on temperature and load current, ensures efficient heat dissipation and enhances the charger's reliability.
Durable and Waterproof Design: The charger features a rugged aluminum alloy casing, providing both durability and aesthetic appeal. Its IP65 waterproof rating allows you to use it confidently in various environments without worrying about water damage.
Enhanced Communication Capabilities: With optional CAN and RS485 communication interfaces, this charger offers advanced communication capabilities. Seamlessly integrate it into your programming setup and gain control over charging parameters for a customized and optimized experience.
Product Introduction:
| Charger Model: | UY1200S | Power: | 1200W |
| Housing: | Aluminium Alloy | Size: | 250x162x93mm |
| Communication: | CAN, RS485 | Waterproof: | IP65 |
| Efficiency: | >=90% | Operating Temperature: | -20 to +40℃ |
| Storage Temperature: | -40 to +70℃ | Noise: | <=40dB |
| Cooling: | Temperature and load current-controlled fan | ||
| Protection: | Over-temperature, over-voltage, over-current, short-circuit, | ||
| and reverse connection protection. | |||
| Charger type: | Suitable for lead-acid batteries (water-added, GEL, and AGM) or lithium batteries (lithium-iron, lithium-manganese, lithium ternary) charging. | ||
| Features: | 1.Automatic multi-stage charging curve for long battery life | ||
| 2.Intelligent fully automatic charging: obtains the battery status and switches the charging mode(charge wait/pre-charge/constant current/constant voltage/float charge/ recharge/ full charge) | |||
| ITEM | vb1250 | vb2440 | vb3625 | vb4820 | |
| Output | LFP charging voltage | 14.6V | 29.2V | 43.8V | 54.75V |
| NCM charging voltage | 16.8V | 29.4V | 42.0V | 54.6V | |
| L-A charging voltage | 14.7V | 29.4V | 44.1V | 58.8V | |
| Float voltage | 13.8V(only Lead) | 27.6V(only Lead) | 41.4V(only Lead) | 55.2V(only Lead) | |
| Constant charge current | 50A | 40A | 25A | 20A | |
| Rotating lamp current | Lead 12.5A/ Lithium 4A | Lead 10A/ Lithium 3.2A | Lead 6.25A/ Lithium 2A | Lead 5A/ Lithium 1.6A | |
| Ripple voltage | ≤2%VOUTMAX | ||||
| Input | Voltage range | 90V~260VAC | |||
| Frequency range | 47~63Hz | ||||
| Power factor | PF>0.98/115VAC, PF>0.95/230VAC at full load | ||||
| Input current(type) | v=W,20A/115VAC,10A/230VAC；v=H,10A/230VAC； | ||||
| v=L,20A/115VAC | |||||
| Vomit (type) | COLD START 50A at 230VAC | ||||
| Leakage Current | ＜0.75m A | ||||
1. Compatible with AGM, gel, lead-acid, NCM, LFP, lithium-ion batteries.
2. Intelligent fully automatic charging: switch charging modes based on the battery's status.
3. Automatic multi-stage charging curve for longer battery life.
4. Supports multiple output plugs
5. Customizable charging profiles or charging modes.
6. With MCU-automated adjustable charging curve, enhanced protection features, and the ability to customize the charging curve.
7. Communication options: RS485, CAN.
Charging Curve:
