Fast CC CV Charging 12V 4A Smart Battery Charger For 16Ah / 22Ah
Lithium Battery Pack
Lithium battery charger 12 volt 4 amps with universal 110
- 230 vac input. Black or silver aluminum casing. Rated ouput 12V
4A and max charging voltage is 14.4 / 14.6V.
As a swtiching mode technology battery charger, it has small size
and light weight, much portable for user. This charger has
intelligent 4 steps charging method and charge your lithium battery
types inclduing LiFePO4, Li ion, LiMO2 batteries with fast speed
and high efficiency. It is a fully automatic charging charger, just
power on and connect it to your battery and then leave it alone.
◆ Advanced high frequency switching mode power supply technology.
◆ DC output isolated from AC input.
◆ Auto worldwide Input 110 / 230Vac(90 ~ 264Vac), 50Hz~60Hz.
◆ Charging parameters are insensitive to the AC input line voltage
◆ Completely automatic battery charging: Pre-charging, CC, CV,
Absorption, Float or Cut-off.
◆ 1 LED: LED Red-Charging, LED Green-Fully Charged or Stand by
◆ Possibility to customize charging curve for request.
◆ Protections: Short circuit, Over-voltage, Over-temperature,
◆ Efficiency > 95%.
◆ Forced ventilation with fans.
◆ 100% full load burn-in test.
◆ Aluminum casing, light weight, portable.
1) Dimensions(LxWxH): 120 x 69 x 45 MM
2) Net weight: 0.6 KG
3) Max charging voltage(CV): 14.4 / 14.6 volts
4) Floating voltage: customized
5) Max output current (CC): 4 amps
6) Charging method: pre-charge, CC, CV, floating / trickle or shut off
7) AC input voltage: 110 - 240Vac
8) AC input freq.: 50/60 Hz
9) AC plug: customized by user’s country
10) Output connector type: customized by applications
11) Enclosure: Aluminum
|Output series: 120W Mini Size: 120×69×45
mm Net weight: 0.6 KG|
|Input||Model||Apply to battery types||Floating V||CV (V)||CC (A)||Switching|
|VL1206L||12V LiFePO4 Battery|| ||14.6V||6A||CC5~8%|
|VL1206||12V Lead-acid Battery||13.5V||14.7V||6A||CC20%|
|VL2404LM||24V Li-MnO2 Battery|| ||29.4V||4A||CC5~8%|
|VL2404||24V Lead-acid Battery||27.6V||29.4V||4A||CC20%|
|VL3603L||36V Li-MnO2 Battery|| ||42V||3A||CC5~8%|
|VL3602||36V Lead-acid Battery||41.4V||44.1V||2A||CC20%|
|VL4802LM||48V Li-MnO2 Battery|| ||54.6V||2A||CC5~8%|
|VL4802||48V Lead-acid Battery||55.2V||58.8V||2A||CC20%|
|Note: customized input / output / plug type / connectors are
Q. What do the abbreviations MF, GEL and AGM mean?
A. Gel, AGM, Vlies, MF, Calcium/Calcium and Hybrid are
abbreviations for different types of lead-acid batteries.
Q. What do the abbreviations LiFePO4, Li-ion, Li-MnO2 and LiCoO2
A. LiFePO4, Li-ion, Li-MnO2 and LiCoO2 are abbreviations for
different types of lithium batteries, that means there batteries
using different cathode materials. Different batteries have
different charging voltages.
Battery Charger Knowledge
Q. What charger should I choose?
A. It depends on the type of battery, the capacity of the battery,
the application and how much you are prepared to spend. Just tell
us your battery information, DANL battery charger engineer will
recommend the most suitable charger for you or customized by your
batteries and applications.
Q. Can I charge several batteries in parallel?
A. The charger has no problem whatsoever of charging or maintaining
several batteries, as long as they are connected in parallel. The
charger sees the parallel connected batteries as one large battery.
The sum of the capacity has to be below the recommendation for your
model. Please note that there could be a high current between
batteries when they are connected together, i.e. use high quality
Q. Can you really connect and then forget about the charger?
A. That depends on your batteries state and charger’s type. Danl
lead-acid battery chargers have maintenance mode(floating mode),
charger charges with very small current at this mode, so you can
forget about the charger but not exceed 24 hours. If your battery
is lithium type and without BMS system, please don’t forget the