Home Companies Danl New Energy Co., LTD

260*150*90 MM 12 Volt Lithium Battery Charger 40 Amps Smart With Soft Start

Contact Us


Trade Verify


Contact name:Chan

Danl New Energy Co., LTD

Verified Suppliers
  • Trust
  • Verified
  • Credit
  • Capability

260*150*90 MM 12 Volt Lithium Battery Charger 40 Amps Smart With Soft Start

Country/Region china
City & Province guangzhou guangdong
Categories Water Safety Products

Product Details

260*150*90 MM Smart Lithium Battery Charger 12 Volts 40 Amps With Soft Start


Brief Description:


12V 40Amps 900 watts output power intelligent battery charger is designed for lithium ion or lead acid battery, input with worldwide 110 to 230Vac and rated output voltatge is 12 Volt 40 amps. Smart max charging voltage is 14.7V for lead acid type batteries and 14.4 / 14.6V for LiFePO4 batteries. Intelligent 4 steps charging with soft start / pre-charge, CC, CV and floating or automatic cut-off, this charger will charge your batteries with very fast speed, with high efficiency and pretect your battery life maximumly. Aluminum housing, light weight and portable.



◆ Advanced high frequency switching mode power supply technology.

◆ DC output isolated from AC input.

◆ Auto worldwide Input 110 / 230Vac(90 ~ 264Vac), 50Hz~60Hz.

◆ Charging parameters are insensitive to the AC input line voltage variations.

◆ Completely automatic battery charging: Pre-charging, CC, CV, Absorption, Float or Cut-off.

◆ 2 LEDs: LED1 Red (power on), LED2 Red / green (charging/full)..

◆ Possibility to customize charging curve for request.

◆ Protections: Short circuit, Over-voltage, Over-temperature, Reverse Polarity.

◆ Efficiency > 95%.

◆ Forced ventilation with fans.

◆ 100% full load burn-in test.

◆ Aluminum casing, light weight, portable.


Technical Specs.:


1) Dimensions(LxWxH): 260 x 150 x 90 mm

2) Net weight: 3.5 KG

3) Max charging voltage(CV): 14.4 / 14.6 volts

4) Floating voltage: customized

5) Max output current (CC): 40 amps

6) Charging method: pre-charge, CC, CV, floating / trickle or shut off

7) AC input voltage: 110 / 240Vac

8) AC input freq.: 50 / 60 Hz

9) AC plug: customized by users country

10) Output connector type: customized by applications

11) Enclosure: Aluminum


Output series: 900W      Size: 260×150×90 mm      Net weight: 3.5 KG
InputModelApply to battery typesFloating VCV (V)CC (A)Switching


AC Input:

110 / 230V





VL1240L12V LiFePO4 Battery 14.6V40ACC5~8%
VL124012V Lead-acid Battery13.5V14.7V40ACC20%
VL144014V AGM Battery13.5V14.4V40ACC20%
VL1640L16V LiFePO4 Battery 18.2V40ACC5~8%
VL2425LM24V Li-MnO2 Battery 29.4V25ACC5~8%
VL2425L24V LiFePO4 Battery 29.2V25ACC5~8%
VL242524V Lead-acid Battery27.6V29.4V25ACC20%
VL3618LM36V Li-MnO2 Battery 42V18ACC5~8%
VL3618L36V LiFePO4 Battery 43.8V18ACC5~8%
VL361836V Lead-acid Battery41.4V44.1V18ACC20%
VL4815LM48V Li-MnO2 Battery 54.6V15ACC5~8%
VL4815L48V LiFePO4 Battery 43.8V15ACC5~8%
VL481548V Lead-acid Battery55.2V58.8V15ACC20%
VL6012L60V LiFePO4 Battery 73V12ACC5~8%
VL601260V Lead-acid Battery67.5V73.5V12ACC20%
VL7210L72V LiFePO4 Battery 87.6V10ACC5~8%
VL721072V Lead-acid Battery81V88.2V10ACC20%
 VL8408L84V LiFePO4 Battery 102.2V8ACC5~8%
 VL840884V Lead-acid Battery94.5V102.9V8ACC20%
Note: customized input / output / plug type / connectors are available.


Battery Knowledge


Q. What do the abbreviations MF, GEL and AGM mean?
A. Gel, AGM, Vlies, MF, Calcium/Calcium and Hybrid are abbreviations for different types of lead-acid batteries.


Q. What do the abbreviations LiFePO4, Li-ion, Li-MnO2 and LiCoO2 mean?

A. LiFePO4, Li-ion, Li-MnO2 and LiCoO2 are abbreviations for different types of lithium batteries, that means there batteries using different cathode materials. Different batteries have different charging voltages.


Battery Charger Knowledge


Q. What charger should I choose?
A. It depends on the type of battery, the capacity of the battery, the application and how much you are prepared to spend. Just tell us your battery information, DANL battery charger engineer will recommend the most suitable charger for you or customized by your batteries and applications.


Q. Can I charge several batteries in parallel?
A. The charger has no problem whatsoever of charging or maintaining several batteries, as long as they are connected in parallel. The charger sees the parallel connected batteries as one large battery. The sum of the capacity has to be below the recommendation for your model. Please note that there could be a high current between batteries when they are connected together, i.e. use high quality wiring.


Q. Can you really connect and then forget about the charger?
A. That depends on your batteries state and charger’s type. Danl lead-acid battery chargers have maintenance mode(floating mode), charger charges with very small current at this mode, so you can forget about the charger but not exceed 24 hours. If your battery is lithium type and without BMS system, please don’t forget the charger.


About DANL Company


Q. Are you a factory or trading company?

A. Danl is battery charger factory and we found in 2008. We have being in switching mode power supply and charger industrial for 15 years and have 10 years of exporting experience to worldwide especially to the high lever market of North America and Euro countries.


Q. What's about the warranty for Danl battery chargers?

Danl promises that we provide full 2 years warranty for our battery chargers. No return for faulty battery chargers firstly, we send you new replacing chargers firstly. Danl adopts latest ATE Automatic Battery Charger Testing System to test all of our battery chargers before shipping, guaranteeing extremely low rate of failure. So we have confidence to provide 2 years warranty.


Q. Do you accept OEM order?

A. Yes, we do. Danl provides OEM, ODM service. Please just tell us your project and we will provide a full charging solution for you, for example, your customized electric vehicles, sun-powered stations, racing batteries, on-board charging, etc.


Q. What is about the lead time for an order?

A. Normally, lead time is 7 days. If need large quantity, say 500 to 1000pcs, it will take about 15 days. If you need ODM charging solution, lead time depends on technical request, often it needs about 30 days.


Q. What certification do you have?

A. We have CE, RoHS, CB currently. We will add and pass the test of certificate which applied in your country.


Q. Why choose your smart battery chargers?

A. Because our battery chargers have high quality but reasonable factory price. First, we do not use cheap and unreliable components to save cost like other charger factories who have very cheap price. Second, we use latest ATE smart battery charger test and aging system and guarantee the quality of every battery chargers.


Hot Products

48V 54.6V 4A Electric Scooter Battery Charger, designed for Lithium battery, only 1.2KG Brief ...
Li-ion Battery Charger 48V 54.6V 5A, customize for Electric Scooters, 90 to 264Vac input Description...
72V 87.6V 5A LiFePO4 Battery Charger For Electric Scooters, Smart CC CV Charging Brief Description: ...
E scooter battery charger 72V 5A for Lead acid batteries, high quality 2 years warranty Brief ...
Electric bike battery charger 36V 2.5A, max 42V 43.8V 44.1V charging for 36V lithium or lead acid ...
Automatic 24V 2A 3A E-Bike Lithium Battery Charger, worldwide input 110-240Vac Brief Description: E...