Active Member
|
[China]
Address: Room 608P,6th Floor,Xuyuan Building,No.5003, Longgang Road,Longgang District ,Shenzhen518116
Contact name:cindy
Lu’s Technology Co., Limited |
|
|
Model:
Li-Polymer battery
3.7V rechargeable batteries
Polymer lithium battery
Lithium ion battery
Li-ion Polymer Battery
3.7V Rechargeable Lithium Polymer Battery LP064560 4000mah
Major Application:
1)MP3/MP4 player, bluetooth, speakers, car GPS and all possible electronics products
2)Widely applied in Telecommunications, Audio and Video Devices, Information Devices...Etc.
Appearance
There shall be no such defect as flaw, crack, rust, leakage, which may adversely affect
commercial value of battery.
Li-Polymer battery Product Advantages:
1) Environmental friendly
2) High density of energy
3) Light weight
4) Low self-discharge
5) Low internal resistance
6) Long cycle life, chargeable up to 500 or 1000 times
7) No memory effect
8) Doesn’t contain Mercury, No fire, No explosion, No leakage
9) Very good and quick charge, capability can be charged to 90% within 10 min.
10) Thickness can be adjusted while width and height keep the same
Product Specification:
Cell
| No.
| Item
| General Parameter
| Remark
| |
| 1 | Rated Capacity
| Typical
| 2000mAH | Standard discharge(0.2C C5A) after Standard charge
| |
Minimum
| 1950mAH | ||||
| 2 | Nominal Voltage
| 3.7V | Mean Operation Voltage
| ||
| 3 | Internal Impedance
| ≤40mΩ | Internal resistance measured at AC 1KHZ after 50% charge
The measure must uses the new batteries that within one week after shipment and cycles less than 5 times
| ||
| 4 | Dimension
| Hight: Max 62.0mm
| Initial Dimension
| ||
Width: Max.45.5mm
| |||||
Thickness: Max.6.2mm
| |||||
| 5 | Standard charge
| Constant Current 0.2C5A Constant Voltage4.2V 0.01C5A cut-off
| 400mA Charge time : Approx6 H
| ||
| 6 | Standard discharge
| Constant current :0.2C5A end voltage3.0V
| 400mA
| ||
| Package | No.
| Item
| General Parameter
| Remark
| |
| 1 | Combination method
| 1S2P
| |||
| 2 | Rated Capacity
| Typical
| 4000mAh | 0.2C5A Standard discharge after Standard charge(package)
| |
Minimum
| 3900mAh | ||||
| 3 | Nominal Voltage
| 3.7V | Mean Operation Voltage
| ||
| 4 | Voltage at end of Discharge
| 3.0V | Discharge Cut-off Voltage
| ||
| 5 | Charging Voltage
| 4.2V | |||
| 6 | Internal Impedance
| ≤150mΩ | Internal resistance measured at AC 1KHZ after 50% charge
The measure must uses the new batteries that within one week after shipment and cycles less than 5 times
| ||
| 7 | Standard charge
| Constant Current 0.2C5A Constant Voltage4.2V 0.05C5A cut-off
| 800mA Charge time : Approx 6.0 h
| ||
| 8 | Standard discharge ) | Constant current 0.2C5A end voltage 3.0V
| 800mA
| ||
| 9 | Maximum Continuous Charge Current
| 0.5C5A | 2000mA | ||
Li ion Polymer Lithium Rechargeable Battery 1S2P LP064560 4000mah:
