Industrial Servo Motor , YASKAWA AC Servo 147W 200V AC Servo Motor
SGMCS-07B3B11
Item Description
Manufactured by YASKAWA ELECTRIC
- YASKAWA ELECTRIC
- SGMCS-07B3B11
- SGMCS-07B3B11
- SERVO MOTOR.
- 1.4AMP
- 100W
- 200V
- 7.0 N.m
- Ins A
- 200r/min
- AVAILABLE
- REBUILT SURPLUS
- NEW SURPLUS
- REPAIR YOURS
- 24-48 HOUR RUSH REPAIR
- 2 - 15 DAY REPAIR
- 2 YEAR RADWELL WARRANTY
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Similar Products
| SGMCS-02B3C11 | SGMCS-02B3C41 |
| SGMCS-04C3B1 | SGMCS-17D3C1 |
| SGMCS-07B3B11 | SGMPH-02AAA2C |
| SGMCS-07B3C11 | SGMCS-35E3A-MB11 |
| SGMCS-08DDA-TE12 | SGMCS-35E3A--MB11 |
| SGMCS-17D3A-MB11 | SGMCS-80M3A11 |
DANGER: LETHAL VOLTAGES ARE PRESENT. Before applying power to the
V1000, ensure that all protective covers are fastened and all
wiring connections are secure. After the power has been turned OFF,
wait at least five minutes until the charge indicator extinguishes
completely before touching any wiring, circuit boards or components
WARNING! DO NOT CONNECT ANY OF THE FOLLOWING TERMINALS TO EARTH
GROUND
C6-01 Drive Duty Selection Setting
0: Heavy Duty
• Rated output current is the HD (Heavy Duty) rating on drive
nameplate.
• Overload capacity is 150 % for 1 minute.
• Carrier frequency is defaulted to 2 kHz but can be increased to 8
kHz or 5 kHz w/o derating on certain models (Refer to Appendix 1)
• Carrier frequency is automatically reduced when:
• output frequency is < 6.0 Hz and current is >100 %
• output frequency is > 6.0 Hz and current is > 112 %
• Maximum output frequency is 400 Hz (except on larger models)
• L8-15: OL2 Characteristic selection@low speed (=1 Enabled)
expedites OL2 at low output frequencies below 6 Hz.
1: Normal Duty (default)
• Output current is ND (Normal Duty) rating on drive nameplate.
• Overload capacity is 120 % for 1 minute.
• Carrier frequency is defaulted to Swing PWM (2kHz) but can be
increased with derating on most models (Refer to Appendix 1)
• Carrier is automatically reduced when:
• output frequency is < 6.0 Hz and current is >100 %
• output frequency is > 6.0 Hz and current is > 112 %
• Maximum output frequency is 400 Hz (except on certain larger
models)
• L8-15: OL2 Characteristic selection@low speed (=1 Enabled)
expedites OL2 at low output frequencies below 6 Hz
Similar to Normal Duty, but with 150 % OL
• Singular output current value on nameplate.
• Overload capacity is 150 % for 1 minute.
• Full range carrier adjustment C6-02.
• Drive must be derated when carrier is set above default, software
protected by OL2.
• Maximum output frequency is 400 Hz.
• L8-15: Characteristic selection @ low speed (=1 Enabled)
expedites OL2.
