REFERENCES
1. Toba, A. and A. T. Lipo, “Generic torque-maximizing design
methodology of surface permanentmagnet vernier machine,” IEEE
Transactions on Industry Applications, Vol. 31, No. 6, 1539–1546,
2000.
2. Ishizaki, A., T. Tanaka, K. Takasaki, and S. Nishikata, “Theory
and optimum design of PM vernier motor,” Seventh International
Conference on Electrical Machines and Drives, (Conf. Publ. No.
412), 208–212, 1995.
3. Toba, A. and A. T. Lipo, “Novel dual-excitation permanent magnet
vernier machine,” Industry Applications Conference, Vol.
4, 2539–2544, 1999. 4. Tasaki, Y., Y. Kashitani, R. Hosoya, and S.
Shimomura, “Design of the vernier machine with permanent magnets on
both stator and rotor side,” Power Electronics and Motion Control
Conference, Vol. 1, 302–309, 2012.
5. Ho, S. L., S. Niu, and W. N. Fu, “Design of the vernier machine
with permanent magnets on both stator and rotor side,” IEEE
Transactions on Magnetics, Vol. 47, No. 10, 3280–3283, 2011.
6. VuXuan, H., D. Lahaye, S. O. Ani, H. Polinder, and J. A.
Ferreira, “Effect of design parameters on electromagnetic torque of
PM machines with concentrated windings using nonlinear dynamic
FEM,” IEEE International Electric Machine & Drives Conference,
383–388, 2011.
7. Sanada, M., K. Ito, and S. Morimoto, “Equivalent air gap
shortening by three-dimensional gap structure for torque
improvement of electric machines,” Electrical Machines and Systems
Conference, 1–6, 2009.
8. Zhang, Y., L. Jing C. Li, G. Tu, and J. Jiang, “Semi-analytical
method for air gap main magnetic field computation of direct drive
permanent magnet torque motors,” Electrical Machines and Systems
Conference, 1–4, 2011.
9. Kano, Y. and N. Matsui, “A design approach for direct-drive
permanent-magnet motors,” IEEE Transactions on Industry
Application, Vol. 44, No. 2, 1–4, 2008.
10. Chau, K. T., D. Zhang, J. Z. Jiang, C. Liu, and Y. Zhang,
“Design of a magnetic-geared outerrotor permanent-magnet brushless
motor for electric vehicles,” IEEE Transactions on Magnetics, Vol.
43, No. 6, 2504–2506, 2007.
11. Chen, G. H. and K. J. Tseng, “Design of a permanent-magnet
direct-driven wheel motor drive for electric vehicle,” Power
Electronics Specialists Conference, Vol. 2, 1933–1939, 1996.
12. Zhao, W., M. Cheng, and R. Cao, “Electromagnetic analysis of a
modular flux-switching permanent-magnet motor using finite-element
method,” Progress In Electromagnetics Research B, Vol. 43, 239–253,
2012.
13. Boughrara, K., T. Lubin, R. Ibtiouen, and M. N. Benallal,
“Analytical calculation of parallel double excitation and
spoke-type permanent-magnet motors; simplified versus exact model,”
Progress In Electromagnetics Research B, Vol. 47, 145–178, 2013.
14. Mahmoudi, A., N. A. Rahim, and H. W. Ping, “Genetic algorithm
and finite element analysis for optimum design of slotted torus
axial-flux permanent-magnet brushless DC motor,” Progress In
Electromagnetics Research B, Vol. 33, 383–407, 2011. 15. Gao, J.,
L. Zhang, and X. Wang, AC Machine Systems, Springer-Verlag, Berlin,
2009. 16. Fitzgerald, A. E., C. Kingsley, Jr., and S. D. Umans,
Electric Machinery, McGraw-Hill, Singapore, 1983. 17. Islam, M. S.,
S. Mir, and T. Sebastain, “Issues in reducing the cogging torque of
mass-produced permanent-magnet brushless DC motor,” IEEE
Transactions on Industry Applications, Vol. 40, No. 3, 813–820,
2004.
