New and original Japan Yakawa 3000RMP 0.61A AC SERVO MOTOR
SGM-A5AWSU12
QUICK DETAILS
Current: 0.6A
Volatge: 200V
Power : 50W
Rated Torque: 0.159N-m
Max speed: 3000rpm
Encoder: 17bit Absolute encoder
Load Inertia JL kg¡m2¢ 10−4: 0.026
Shaft: straight without key
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Contact person: Iris
E-mail: Iriss88@163.com
Cellphone: +0086-17728602038
Fixed line:0752-2222038
Wechat:18026552038
WhatsApp:+86 18026552038
| SGDM-10AC-SD1 |
| SGDM-10ADA |
| SGDM-10ADG-P |
| SGDM-10AN-P |
| SGDM-15AC-SD1 |
| SGDM-15ADA |
| SGDM-15ADA.SGDH-15AE |
| SGDM-1AADA |
| SGDM-1EADA |
| SGDM-20AC-SD1 |
| SGDM-20AC-SD2B |
| SGDM-20AC-SD2BM |
| SGDM-20ADA |
| SGDM-20ADA-V |
| SGDM-20ADA-Y47 |
| SGDM-30AC-SD1 |
| SGDM-30ADA |
| SGDM-30ADA-V |
| SGDM-50AC-SD1 |
| SGDM-50ADA |
| SGDM-50ADAY60 |
| SGDM-60AC-SD1 |
| SGDM-60ADA |
| SGDM-75AC-SD1 |
| SGDM-75ADA |
| SGDM-A3ADA |
| SGDM-A3ADA+SGMAH-A3AAAJ36C |
| SGDM-A3ADA+SGMAH-A3ABA21 J |
| SGDM-A3ADA-R |
| SGDM-A3BD |
| SGDM-A3BDA |
| SGDM-A3BDAY278 |
| SGDM-A5ADA |
| SGDM-A5ADA+SGMAH-A5AAA21 |
| SGDM-A5ADA-R |
| SGDM-A5ADA-TE3B |
| SGDM-A5AD-RY90+SGMAH-A5AAA21 |
| SGDM-A5ADY90 |
| SGDM-A5BDA |
| SGDM-A5BDA+SGMAH-A3BAA21 |
| SGDM-A5BDA+SGMAH-A5BAA21 |
Short Circuit Trip This function is intended to protect the stator
windings of the motors against phase-to-phase faults. Equipped with
an overreach filter, the RTD Thermal Capacity Used (%) RTD Bias
Maximum RTD Bias Minimum RTD Bias Center Point 100 90 80 70 60 50
40 30 20 10 0 -50 0 50 100 150 200 250 Maximum Stator RTD
Temperature (C) 806809A4.cdr RTD Bias curve. Thermal Capacity Used
Time in Minutes 100 75 50 25 0 0 50 100 150 200 250 806810A3.cdr
Iavg @ 100% FLA Iavg @ 50% FLA Exponential cooldown (hot/cold curve
ratio 60% 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0 1 2 3 4 5 k=2 k=4
k=6 k=8 k= 10 Derating Factor Percent Voltage Unbalance Motor
derating factor due to unbalanced voltage 400 469 Motor Protection
System Motor Protection www.GEDigitalEnergy.com 469 removes the DC
component from the asymmetrical current present at the moment a
fault occurs or motor starts. A trip backup feature is also
available as part of this function, used to issue a second trip if
the fault is not cleared within a given time delay. The backup
feature can also be assigned to an auxiliary contact for
annunciation or remote tripping of upstream protection devices
Ground Fault This function is designed to protect motors against
phase to ground faults. There are two dedicated ground current
inputs in the relay, which support the following types of ground
current detection. • Core balance (Zero sequence) current
transformer. • Core balance (Zero sequence) 50:0.025 A (sensitive)
current transformer. • Residual connection of phase current
transformers. The function is equipped with an overreach filter,
which removes the DC component from the asymmetrical current
present at the moment a fault occurs, or a motor starts. Two pickup
levels ( trip and alarm) with individual time delays are available
for ground fault detection. A trip Backup feature is also available
as part of this function. The operational principal of Ground Fault
Trip Backup is the same as of Short Circuit Trip Backup
