GENERAL ELECTRIC PLC IC200GBI001-LL GE FANUC GENIUS NETWORK INTERFACE BRAND-NEW

IC200GBI001-LL GE FANUC GENIUS NETWORK INTERFACE

IC200GBI001 is a VersaMax communication module. This module is a Genius network interface unit that allows the VersaMaxI/O module to be installed in a distributed I/O architecture. This module is designed for every
Each rack can accommodate up to eight (8) I/O modules and supports installation of up to eight (8) racks, with a maximum of 64 I/O modules supported. Support 153.6 kbaud transmission speed and expand network configuration; Standard configuration
Set to 153.6 thousand baud, 76.8 thousand baud, and 38.4 thousand baud,
IC200GBI001 can accommodate a large number of I/O points, specifically, for discrete inputs, it can accommodate up to 1024 points; 1024 discrete outputs; 128 byte analog input memory and 128 byte module
Intended output memory. This module can manage network inputs of 128 bytes per scan and outputs of 128 bytes per scan. Its power consumption is 250 mA @ 4 VDC and 10 mA @ 3.3 mA.
IC200GBI001 is compatible with various controller systems, as both previous and modern controller platforms support the Genius protocol. Compatible control systems include the 90-70 series and PACSystem RX7i and
PACSystem RX3i. The appropriate firmware version must be loaded into the controller and IC200GBI001 Genius network interface module.
IC200GBI001 is equipped with dual Genius connection terminals. The upper terminal serves as the main Genius connection point, while the lower terminal serves as a redundant port. These ports are designed for daisy chain topology connections and are used for communication
Install a termination resistor at both ends of the communication cable. The appropriate resistance values between terminals Serial 1 and 2 are 75, 100, 120, or 150 ohms.
The GE Fanuc IC200GBI001 unit is a network interface unit or NIU manufactured by GE Intelligent Platforms/GE Fanuc. It belongs to the GE Versamax series and was previously connected to the
Different I/O modules provide control functions. When the correct firmware version is installed on the NIU, it is compatible with several modules, such as Genius Bus Controller, 90-70 Series PLC, and PacSystems RX7i
Rx3i PLCs. Any computer that can control the bus can be used as a host. Each rack on the IC200GBI001 network interface unit has a capacity of 8 modules and supports a maximum of 8 racks. Each
The maximum network input that the bus can scan is 128 bytes, the maximum discrete I/O memory is 1024 points, and the analog I/O memory is 128 bytes.
The GE Fanuc IC200GBI001 unit has two different power settings, namely a 3.3 volt power supply at 10 mA and a 5 volt power supply at 250 mA. It has serial bus addresses from 0 to 31.
For extended transmission, the data transmission rate of the entire network is 153.6 kilobaud, while the standard transmission rate is 153.6 kilobaud -76.8 kilobaud or 38.4 kilobaud. Operation of IC200GBI001 Network Interface Unit
Operators must be aware that the transmission rate varies depending on the distance between devices and the number of supported devices. IC200GBI001 NIU has a wide range of functions, including 64 analog I/Os, use of fiber optic cables, and shielding
The ability of twisted pair (STP) cables, movable connectors, and operator diagnostic data obtained through Enhanced Diagnostic Mode (EDM). In addition, the network interface unit provides redundancy for hardware and media.

Terms:

We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and
inspection.
Turnaround Time:

Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Packaging and Handling:

Items are safely packaged in custom shipping cartons for protection.

Shipping:

We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT and other
fees applied by their respective countries.

All shipments are fully insured.

Our advantage Products:

【Yaskawa】Servo Drive / Servo Motor

【Mitsubishi】Servo Drive / Servo Motor

【Honeywell】Module DCS / PLC

【Emerson】DeltaV Module / Servo Motor

【ABB】Input Output Module

【AB】Module / Touch Screen

【Rosemount】Pressure and Temperature Transmitter

【Yokogawa】Pressure Transmitter

【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive

(Modicon,SMC,SICK,NORGREN,Siemens etc.)

Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038

Tag:electric servo drive,
ac servo drive,
ac servo pack