Detailed data :
| Brand : | Yaskawa | Model : | SGDB-15VD |
| AC input : | 200-230v | Freq : | 50 / 60Hz |
| Phase : | three | AMPS: | 10.0 |
| AC output : | 0-230v | Phase : | three |
| AMPS : | 10.5 | Power: | 1.3kw |
SGDB-15VD Yaskawa Three Phase AC Input Or Output Servopack Module
Z-V series servo motor SGMPS type.
Rated output: 1.5kw.
Power supply voltage: AC200V
Serial encoder: 17 bit incremental type (standard).
Design sequence: IP55 (standard).
Shaft end: straight shaft, with keyway, and screw hole (optional)
from Yaskawa Machinery.
Optional: With oil seal and holding brake (DC24V).
Corresponding to RoHS instructions: Compliant with RoHS
instructions,
Medium inertia
Flat type with shorter depth
Equipped with high-resolution serial encoder (17 bit)
Maximum speed reaches 6000r/min
Complete variety (100W~1.5kW, with holding brake)
The standard adopts IP55SGDV-R70A21A, which is also applicable to
IP67 (optional) Yaskawa Machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, above 10M Ω,
Operating environment temperature: 0-40 ° C Yaskawa Machinery
Excitation method: permanent magnet type
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V1 for 1 minute.
Protection method: fully enclosed self cooling IP65 (excluding the
shaft penetration part).
Operating environment humidity: 20-80% (no condensation allowed).
Connection method: Direct connection.
Rotation direction: When viewed from the negative cutting side
under the forward rotation command, it rotates counterclockwise
(CCW). Equipped with DeviceNet communication functional servo unit
(external
Power driven model (kit model)
Maximum applicable motor capacity: 0.75kw.
Power supply voltage: three-phase AC200V co server driver
MECHATROLINK-W communication command type
Interface: Command optional installation type (for linear servo
motors).
Optional (hardware): Painting treatment.
Optional (software): Standard.
Optional (parameter): Standard.
Optional module: DeviceNet bottle block (external power
driven)+fully closed loop module.
According to the communication specifications of the open field
network DeviceNet.
The combination of an upper controller equipped with DeviceNet and
V can easily implement motion control oral driver MECHATROLINK -
III communication
Instruction type.
You can leverage the rich DeviceNet support software available on
the market.
The upper controller can be used to manage the same server
information
Monitor the operation status and alarm information of the servo
driver from the upper controller through the network.
By using the upper controller to manage server information,
maintenance is improved (reducing debugging time and improving
maintenance efficiency).
Saving wiring, reducing costs, and improving reliability.
Due to the communication network between the upper controller and
the servo unit, it greatly saves wiring servo drivers
MECHATROLINK - Blood communication command type.
Built in rich positioning functions.
Various positioning actions can be easily carried out from the
upper controller (PLC or computer).
Equipped with rich positioning functions such as simple
positioning, origin reset, continuous rotation action, continuous
rotation action positioning, and program operation. Safety module
Block.
Maximum applicable motor capacity: 0.2kw.
Power supply voltage: three-phase AC200V.
Interface: MECHATROLINK - II communication command type (for rotary
servo motors).
Design sequence: B
Hardware specifications: Base mounted type (standard).
Optional (software): No optional (standard).
Optional (parameter): No optional (standard).
Optional module: Security module.
European EC Standard: According to the integrated standard of the
Machinery Directive ENISO13849-1,
Safety modules equipped with safety functions specified in
individual standards IEC 61800-5-2.
By combining with SGDV servo units, the optimal safety design of
mechanical systems that meets industry requirements has been
achieved.
Suitable for AC servo drive, with the following safety functions
specified in the international standard IEC61800-5-2 (the first in
Japan) SGDV-
R70A21A
The optimal safety design of mechanical systems can be easily
achieved.
Safe Torque Off (STo)
Safe Stop1 (SS1)
Safe Stop2 (SS2)
Safely Limited Speed (SLS)
Equipped with 2 safety functions, which can be set (assigned)
separately for safety functions SGDV-R70A21A and Yaskawa
SGDV-R70A21A
In addition, monitoring time and other items can also be changed
through parameter changes,
The use of accompanying servo units and safety modules simplifies
and miniaturizes the system composition.
Condition:
A brand-new, unused, unopened, undamaged item in its original
packaging (where
packaging is applicable). Packaging should be the same as what is
found in a
retail store, unless the item is handmade or was packaged by the
manufacturer
in non-retail packaging, such as an unprinted box or plastic bag.
See the
seller's listing for full details.
Terms:
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing
and
inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method
chosen.
Rush and off-hours service available for an additional fee.
Packaging and Handling:
Items are safely packaged in custom shipping cartons for
protection.
Shipping:
We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT
and other
fees applied by their respective countries.
All shipments are fully insured.
Our advantage Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038
Tag:electric servo drive,
ac servo drive,
ac servo pack
