|
[China]
Trade Verify
Address: Room 1102 Bld 130 Zone C LongSheng New Village Dalang Street Longhua New Dist. Shenzhen 518109
Contact name:Kelly
Shenzhen Meixin Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Limplus Stainless Steel Movable Submersible Ultrasonic Transducers with Flexible Cable 1200W
Limplus ultrasonic cleaners have made cleaning work easier and more efficient, clean virtually any part in minutes while avoiding any previously used toxic cleaning agents.
Waterproof Immersion ultrasonic transducer system is applied in the existing tank or container(round is also ok).
Flexible cable leadout method allow it can be moved to other tanks if needed.
Features:
1. Box size can be customized.
2. Varies cable leadout method
3. Hard Cr plating treatment for transducer box.
4. Multi frequency is also available.
5. BLT type transducer.
Details of LS-24T:
Transducer box size: 500*350*100mm
Ultrasonic power: 0~1200W
Ultrasonic frequency: 28khz/ 40khz
Material: SUS304 / SUS316L
Surface handle: Hard-Cr plating
Transducer numbers: 24pcs
Cable leadout method: Rigid or flexible
Transducer box system specification:
| Model | Unit Size (mm) | Ultrasonic Power(W) | Frequency(kHz) | Transducers(pcs) | Material | Voltage |
| LS-06T | 280*180*100 | 0~300 | 28/40 | 6 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-12T | 360*250*100 | 0~600 | 28/40 | 12 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-18T | 410*300*100 | 0~900 | 28/40 | 18 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-24T | 500*350*100 | 0~1200 | 28/40 | 24 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-30T | 550*420*100 | 0~1500 | 28/40 | 30 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-36T | 620*500*100 | 0~1800 | 28/40 | 36 | SUS304/SUS316L | AC 110V/230V, 1phase |
| LS-48T | 750*600*100 | 0~2400 | 28/40 | 48 | SUS304/SUS316L | AC 110V/230V, 1phase |
FAQ:
Q.: What are the advantages of ultrasonic technology over traditional cleaning methods?
A.: Minimize the use of manual labor
Make cleaning and degreasing without the use of organic solvents
Clean hard to reach areas of products and remove all types of dirt
Shorten the processes such as extraction, dispersion, purification, chemical reactions
Eliminates costly mechanical and chemical cleaning of heat exchangers
Q.: Which ultrasonic frequency is better for my parts?
A.: Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truck/vessel parts clean(remove oils, grease, pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc.
Higher precision goods, higher frequency.
Q: How do I get the best out of my ultrasonic cleaner?
For best results, ensure the component being cleaned is fully submerged in a suitable cleaning fluid and not touching the tank to allow maximum cavitations.
Please refer below picture and choose the convenient cable leadout method according to your tank.
