Henan Eternalwin Machinery Equipment Co., Ltd. |
Verified Suppliers
|
|
Remote Control 10ton Light Weight Single Girder Gantry Crane With Electric Hoist
Single girder hook gantry crane is a kind of large lifting capacity, light weight, low cost of the whole machine, small beam frontal area of the whole crane, and high safety. Single girder hook gantry crane is a kind of material handling equipment with a wide range of applications. It is usually used in factories, mines, enterprise production workshops, station logistics sites, ports and wharves and other departments. Single girder hook gantry crane mainly consists of metal structure, trolley, crane operating mechanism, electrical device and so on.
Single girder grab gantry crane is widely used in loading and unloading of bulk cargo in freight
yards, bulk material workshops, port terminals and other places.
Suitable for factories, mines, buildings, warehouses, etc. It has
the characteristics of superior performance, reliable operation,
high speed and high efficiency for the operation of grabbing sand,
coal ash, sediment and lumps.
MH electric hoist gantry crane is a small and medium-sized simple gantry crane with cantilever.
Including electric hoist, cart running mechanism, bridge,
outriggers, electrical equipment and other parts. The main beam of
the machine is welded by I-beam and steel plate, and the outrigger
and lower beam are welded by steel plate. Therefore, it has the
advantages of simple structure, light weight, good wind resistance,
reliable operation, convenient maintenance and low cost. It is
suitable for open-air work places such as station docks, warehouse
yards, construction sites, cement product yards, factories,
hydropower stations, etc., and is also suitable for indoor workshop
work.
3-10 ton electric hoist gantry crane is mainly composed of a mast (main girder, outrigger, lower beam,
etc.), a lifting mechanism, an operating mechanism and an electric
control part. Used together with CD1 or MD1 electric hoist, it is a
light and small lifting equipment that runs on rails. The crane is
mostly used in factories, freight yards, wharves, hydropower
stations and other open places where the frequency of use is low or
the number of times the rated lifting capacity is lifted is small.
The crane is forbidden to lift molten metal and flammable and
explosive items. According to user requirements, it can also be
made into single-end overhanging cantilever or non-cantilever
structure.
1. Optimized design of single girder gantry crane, compact overall
structure.
2. With the gate-shaped frame structure, the cart can walk on the
pre-paved track on the ground. It has the advantages of large
operation range, wide adaptability, high site utilization rate and
strong versatility.
3. The single-girder gantry crane adopts flexible outriggers to
make the gantry small and exquisite, saving space.
4. It is suitable for lifting the rated load below 20t.
5. The gantry bracket is used to effectively release the stress and
prolong the structural life.
6. Single-girder gantry crane frequency conversion control, stable
operation.
7. Standardized and unified configuration, so that the stability of
the whole machine is higher.
Product Name | Single Beam Gantry Crane | ||
---|---|---|---|
Lifting Height (m) | 6,9,12,18,24,30 | ||
Electric Hoist Model | MD1 Model | HC Model | CD1 Model |
Lifting Speed (m/min) | 8/0.8 (7/0.7) | 3.5 (3.5/0.35) | 8 (7) |
Traveling Speed (m/min) | 20/30 | ||
Motor | Cone Squirrel-cage Model | ||
Working Class | Internediate | ||
Electric Current | 380V 50Hz Three-phase | ||
Width of Trail | 37-70 | ||
Wheel Diameter | ø270 |