Active Member
|
[China]
Address: No.5 Zhangba First St, Xian High-Tech Area, Shaanxi Province
Contact name:Alven
Xian LIB Environmental Simulation Industry |
|
|
Xenon Exposure Chamber
specification
Equipped with 1 Water Cooled xenon arc lamp with inner quartz and outer borosilicate filter
Specimen Capacity is 34.
Standard holder size 8*15cm.
Irradiance 100~1200 W/㎡
Temperature from Ambient to 100℃
Humidity 50~98% R.H
BPT 30~85℃
Water reservoir 50 Liter
Programmable color touch display controller
Control of temperature, relative humidity, irradiance and water spraying.
1 piece of radiometer
Black panel thermometer
PT-100 temperature sensor
Dry and wet bulb sensor
Over-temperature protection
Humidifier dry-combustion protection
Water shortage protection
Over-current protection
Earth leakage protection
380V, 50Hz
Main Technical Parameter
XL Series
| Model | XL-500 | XL-750 |
| Internal dimensions (mm) | 500*760*500 | 950*950*850 |
| Overall dimensions (mm) | 1200*1150*1480 | 1280*1320*1980 |
| Specimen Capacity | 28 | 34 |
| Holder size | 8*15cm | 8*15cm |
| Technical structure | ||
| Xenon Arc Lamp | 1 Water Cooled xenon arc lamp with inner quartz and outer borosilicate filter. | |
| Xenon lamp power | 6500W(Lamp life time: 1600 hours) | |
| Temperature range | Ambient ~100℃ | |
| Relative Humidity range | 50~98% R.H | |
| Irradiance Ranges W/m2 | 100~1200 W/㎡ 280nm~800nm | |
| BPT Temperature | 35 ~85℃ | |
| Distance between sample and lamp | Approx. 350mm | Approx. 450mm |
| Water spray time | 1～9999H59M, settable | |
| Water spray cycle | 1~240 minute, interval settable | |
| Control system | ||
| Controller | 5.7" programmable color display touch screen controller | |
| PC Link with software, R-232 interface | ||
| Temperature Sensor | PTR Platinum Resistance PT100Ω/MV A-class | |
| Temperature Resolution | ± 0.001 ℃ | |
| Humidity Sensor | Dry and wet bulb sensor | |
| Humidity Resolution | ± 1%RH | |
| Radiometer | Tolerance: ±5% | |
| Heating system | Independent Nichrome electronic heating system | |
| Cooling system | French TECUMSEH compressor | |
| Humidification system | External isolation, stainless steel surface evaporation humidifier | |
| Water supply system | Automatic water supply, Water purification system, Water save | |
| Circulatory system | Cold resistance and low noise centrifugal fan | |
| Material | ||
| Exterior material | Steel Plate with protective coating | |
| Interior material | SUS304 stainless steel | |
| Insulation window | Double thermostability silicone rubber sealing | |
| Power Supply | AC380V 50HZ Three-phase five line system | |
| Ambient Temperature | 5℃～+30 ℃ ≤85% RH | |
| Standard | IEC 60068-2-5;JIS D0205;En50483-6; | |
XL-S Series
| Model | XL-S-500 | XL-S-750 |
| Internal dimensions (mm) | 500*760*500 | 950*950*850 |
| Overall dimensions (mm) | 1200*1150*1480 | 1280*1320*1980 |
| Specimen Capacity | 28 | 34 |
| Holder size | 8*15cm | 8*15cm |
| Technical structure | ||
| Xenon Arc Lamp | 1 Water Cooled xenon arc lamp with inner quartz and outer borosilicate filter. | |
| Xenon lamp power | 1500(4500)W(Lamp life time: 1600 hours) | |
| Temperature range | Ambient ~100℃ | |
| Relative Humidity range | 50~98% R.H | |
| Irradiance Ranges W/m2 | 40 ~ 180 W/㎡ 300-420nm | |
| BPT Temperature | 35 ~85℃ | |
| Distance between sample and lamp | Approx. 350mm | Approx. 450mm |
| Water spray time | 1～9999H59M, settable | |
| Water spray cycle | 1~240 minute, interval settable | |
| Control system | ||
| Controller | Programmable color touch-screen controller | |
| PC Link with software, R-232 interface | ||
| Temperature Sensor | PTR Platinum Resistance PT100Ω/MV A-class | |
| Temperature Resolution | ± 0.001 ℃ | |
| Humidity Sensor | Dry and wet bulb sensor | |
| Humidity Resolution | ± 1%RH | |
| UV Radiometer | Tolerance: ±5% | |
| Heating system | Independent Nichrome electronic heating system | |
| Cooling system | French TECUMSEH compressor | |
| Humidification system | External isolation, stainless steel surface evaporation humidifier | |
| Water supply system | Automatic water supply, Water purification system, Water saving | |
| Circulatory system | Cold resistance and low noise centrifugal fan | |
| Material | ||
| Exterior material | Steel Plate with protective coating | |
| Interior material | SUS304 stainless steel | |
| Insulation window | Double thermostability silicone rubber sealing | |
| Power Supply | AC380V 50HZ Three-phase five line system | |
| Ambient Temperature | 5℃～+30 ℃ ≤85% RH | |
| Standard | ISO 105 B02 ;ISO 105 B07; AATCC TM 16;ASTM G 155; | |
Design and Construction
Test area and sample holder
Test area is made of stainless-steel.
Standard sample holder, holder size is 8*15cm.
Specimen Capacity is 34.
If need special holder, should confirm in advance
Control panel
5.7" programmable color display touch screen controller
Program: 100 groups in 999 sections
R-232 interface
Xenon arc lamp
Chamber equipped with 1pc of Xenon lamp, which is water cooling.
Xenon Lamp Power is 1500W / 4500W / 6000W.
Xenon lamp service life is 1600hours.
Cooling system
TECUMSEH compressor from France
Environment friendly Refrigerant R404A
Humidity system
External isolation, stainless steel surface evaporation humidifier
Water spraying
Automatic water supply, water purification system, water saving.
Water reservoir 50 Liter
Radiometer & Sensors
Temperature sensor PT-100 A class
Resolution: ± 0.001 ℃
Humidity sensor Dry and wet bulb
Resolution: ± 1%RH
Irradiance Radiometer
Tolerance: ±5%
Black panel thermometer.
Safety protection
Humidifier dry-combustion protection
Independent over-temperature protection,
Water shortage protection
Over-current protection
Refrigerant high-pressure protection switch
Earth leakage protection and so on
Power supply and Wiring
380V, 50 Hz 10% +/-
Three-phase five little system
Package with Export Standard Wooden Box
Can be used for Sea, Air,Railway, Truck transportation
Installation
Environment conditions
Temperature:5 ℃ --35 ℃ , Relative humidity: ≤85%, pressure: 86kPa—106 Kpa
Space conditions
Chamber shall be installed on flat floor, with good ventilation
No combustible material, explosive material or strong vibration around.
No direct sunlight or other heat sources direct radiation.
No strong airflow around.
No strong electric field around.
Warranty & Service
Warranty period: 3 years
Service:
| Our company will repair the product, if the product, the material of the parts, the design and manufacturing of the products made by our company arise hardware problems caused by product itself rather than human error within three years warranty period since the date of delivery. |
| Firstly, we can provide the spare parts with you. And also provide the solution about the trouble of the products. |
| Secondly, Please send back the apparatus, which will be repaired by our company. |
| Lastly, we would like to appoint our technical engineer to your company to repair the apparatus. |
Contact us
Mrs Wendy
Company Name:Xian LIB Environmental Simulation Industry
Add: No.5 Zhangba First St, Xian High-Tech Area, Shaanxi Province P.R. China 710065
Tel: +86 (0)29 68918976
Email: Wendy@ lib-industry.com
Skype: wendy.lib
