Home Companies Xian LIB Environmental Simulation Industry

Xenon Lamp Test Chamber

Active Member

Contact Us

[China]

Address: No.5 Zhangba First St, Xian High-Tech Area, Shaanxi Province

Contact name:Alven

Xian LIB Environmental Simulation Industry

Xenon Lamp Test Chamber

Country/Region china
City & Province Shaanxi
Categories Mailers

Product Details

Xenon Lamp Test Chamber

Specification:

  • Equipped with 1 Water Cooled xenon arc lamp with inner quartz and outer borosilicate filter
  • Specimen Capacity is 34. (XL-500 is 28)
  • Standard holder size 8*15cm.
  • Irradiance 100~1200 W/㎡     UV 40 ~ 180 W/㎡ 
  • Temperature from Ambient to 100℃
  • Humidity 50~98% R.H
  • BPT 30~85℃
  • Water reservoir 50 Liter
  • Programmable color touch display controller
  • Control of temperature, relative humidity, irradiance and water spraying.
  • 1 piece of radiometer
  • Black panel thermometer
  • PT-100 temperature sensor
  • Dry and wet bulb sensor
  • Over-temperature protection
  • Humidifier dry-combustion protection
  • Water shortage protection
  • Over-current protection
  • Earth leakage protection
  • 380V, 50Hz

Main Technical Parameter

XL Series

 

 

ModelXL-500 XL-750
Internal dimensions (mm)500*760*500950*950*850
Overall dimensions (mm)1200*1150*14801280*1320*1980
Specimen Capacity2834
Holder size 8*15cm8*15cm
Technical structure
Xenon Arc Lamp1 Water Cooled xenon arc lamp with inner quartz and outer borosilicate filter.
Xenon lamp power4500W(Lamp life time: 1600 hours)
Temperature range   Ambient ~100℃
Relative Humidity range50~98% R.H
Irradiance Ranges W/m2100~1200 W/㎡     280nm~800nm
BPT Temperature35 ~85℃
Distance between sample       and lamp  Approx. 350mmApprox. 450mm
Water spray time1~9999H59M, settable
Water spray cycle1~240 minute, interval settable
Control system
Controller5.7" programmable color display touch screen controller
PC Link with software, R-232 interface
Temperature SensorPTR Platinum Resistance PT100Ω/MV A-class
Temperature Resolution± 0.001 ℃
Humidity SensorDry and wet bulb sensor
Humidity Resolution± 1%RH
Radiometer Tolerance: ±5%
Heating systemIndependent Nichrome electronic heating system
Cooling systemFrench TECUMSEH compressor
Humidification systemExternal isolation, stainless steel surface evaporation humidifier
Water supply systemAutomatic water supply, Water purification system, Water save
Circulatory systemCold resistance and low noise centrifugal fan
Material
Exterior materialSteel Plate with protective coating
Interior materialSUS304 stainless steel
Insulation windowDouble thermostability silicone rubber sealing
Power SupplyAC380V 50HZ Three-phase five line system
Ambient Temperature5℃~+30 ℃   ≤85% RH
StandardIEC 60068-2-5;JIS D0205;En50483-6;

 

XL-S Series

 

 

ModelXL-S-500 XL-S-750
Internal dimensions (mm)500*760*500950*950*850
Overall dimensions (mm)1200*1150*14801280*1320*1980
Specimen Capacity2834
Holder size 8*15cm8*15cm
Technical structure
Xenon Arc Lamp1 Water Cooled xenon arc lamp with inner quartz and outer borosilicate filter.
Xenon lamp power4500W(Lamp life time: 1600 hours)
Temperature range   Ambient ~100℃
Relative Humidity range50~98% R.H
Irradiance Ranges W/m240 ~ 180 W/㎡   300-420nm        
BPT Temperature35 ~85℃
Distance between sample and lamp  Approx. 350mm Approx. 450mm
Water spray time1~9999H59M, settable
Water spray cycle1~240 minute, interval settable
Control system
ControllerProgrammable color touch-screen controller
PC Link with software, R-232 interface
Temperature SensorPTR Platinum Resistance PT100Ω/MV A-class
Temperature Resolution± 0.001 ℃
Humidity SensorDry and wet bulb sensor
Humidity Resolution± 1%RH
UV Radiometer Tolerance: ±5%
Heating systemIndependent Nichrome electronic heating system
Cooling systemFrench TECUMSEH compressor
Humidification systemExternal isolation, stainless steel surface evaporation humidifier
Water supply systemAutomatic water supply, Water purification system, Water saving
Circulatory systemCold resistance and low noise centrifugal fan
Material
Exterior materialSteel Plate with protective coating
Interior materialSUS304 stainless steel
Insulation windowDouble thermostability silicone rubber sealing
Power SupplyAC380V 50HZ Three-phase five line system
Ambient Temperature5℃~+30 ℃   ≤85% RH
Standard ISO 105 B02 ;ISO 105 B07; AATCC TM 16;ASTM G 155;        

 

Design and Construction

Test area and sample holder

Test area is made of stainless-steel.

Standard sample holder, holder size is 8*15cm.

Specimen Capacity is 28. (XL-750 is 34)

If need special holder, should confirm in advance

Control panel

5.7" programmable color display touch screen controller                           

Program: 100 groups in 999 sections

R-232 interface

PC Link with software

Xenon arc lamp

Chamber equipped with 1pc of Xenon lamp, which is water cooling.

Xenon Lamp Power is 4500W .

Xenon lamp service life is 1600hours.

Cooling system

TECUMSEH compressor from France

Environment friendly Refrigerant R404A

Humidity system

External isolation, stainless steel surface evaporation humidifier

Water spraying

Automatic water supply, water purification system, water saving.

Water reservoir 50 Liter

Radiometer & Sensors

Temperature sensor   PT-100 A class

Resolution: ± 0.001 ℃

Humidity sensor   Dry and wet bulb

Resolution: ± 1%RH

Irradiance Radiometer

Tolerance: ±5%

Black panel thermometer.

Safety protection

Humidifier dry-combustion protection

Independent over-temperature protection,

Water shortage protection

Over-current protection

Refrigerant high-pressure protection switch

Earth leakage protection and so on

Power supply and Wiring 

380V, 50 Hz  10% +/-

Three-phase five little system

Package with Export Standard Wooden Box

Can be used for Sea, Air,Railway, Truck transportation.

Installation

Environment conditions

Temperature:5 ℃ --35 ℃ , Relative humidity: ≤85%, pressure: 86kPa—106 Kpa

Space conditions

Chamber shall be installed on flat floor, with good ventilation

No combustible material, explosive material or strong vibration around.

No direct sunlight or other heat sources direct radiation.

No strong airflow around.

No strong electric field around.

Warranty & Service

Warranty period: 3 years

Service:

 

 

Our company will repair the product, if the product, the material of the parts, the design and manufacturing of the products made by our company arise hardware problems caused by product itself rather than human error within three years warranty period since the date of delivery. 
Firstly, we can provide the spare parts with you. And also provide the solution about the trouble of the products.
Secondly, Please send back the apparatus, which will be repaired by our company.
Lastly, we would like to appoint our technical engineer to your company to repair the apparatus.

Contact us:

Ms.wendy

Company Name: Xian LIB Environmental Simulation Industry

Tel:+86 (0)29 68918976

Email:Wendy@lib-industry.com

Skype:wendy.lib

 

 

 

 

 

Hot Products

climate thermal shock chamber 2-Zone Thermal Shock Test Chamber Specifications Model TS-162 TS-340 ...
thermal shock environmental test chambers manufacturers 2-Zone Thermal Shock Test Chamber Specificat...
thermal shock environmental test chambers used 2-Zone Thermal Shock Test Chamber Specifications ...
thermal shock test chamber 2-Zone Thermal Shock Test Chamber Specifications Model TS-162 TS-340 TS...
thermal shock climatic chamber price 2-Zone Thermal Shock Test Chamber Specifications Model TS-162 ...
thermal shock climatic chamber 2-Zone Thermal Shock Test Chamber Specifications Model TS-162 TS-340 ...