Active Member
|
[China]
Address: No.5 Zhangba First St, Xian High-Tech Area, Shaanxi Province
Contact name:Alven
Xian LIB Environmental Simulation Industry |
|
dust test vertical flow chambers
Standard Features
Main Technical Parameter
| Model | DI-800 | DI-1000 | DI-1500 | DI-2000 |
| Internal dimensions (mm) | 800*1000*1000 | 1000*1000*1000 | 1000*1500*1000 | 1200*1800*1200 |
| Overall dimensions (mm) | 1050*1420*1820 | 1250*1420*1820 | 1250*1900*1820 | 1500*2200*2200 |
| Performance index | ||||
| Normal wire diameter | 50um | |||
| Normal width of a gap between wire | 75um | |||
| The Talcum powder amount | 2kg ~ 4kg/m3 | |||
| Fight time | 0 ~ 99H59M | |||
| Fan cycle time | 0 ~ 99H59M | |||
| Specimen power outlet | Dust-proof socket AC220V 16A | |||
| Control system | ||||
| Controller | 5.7" programmable color display touch screen controller | |||
| PC Link with software, R-232 interface | ||||
| Vacuum system | Equipped with a pressure gauge, air filter, pressure regulator, connecting tube | |||
| Circulating fan | Enclosed alloy low-noise motor, multi-vane centrifugal fan | |||
| Heating system | Independent Nichrome electronic heating system | |||
| Power supply | 380V 50HZ; | |||
| Safety Devices | Electric leakage, short circuit, Over-temperature, motor
overheating Over-current protection/ Power failure memory function for controller | |||
| Note: The test chamber can meet the standards IEC60529
GB2423,GB4706,GB4208, and satisfy the experiment requirements of parts enclosure protection grade for household appliances for DIN,low-voltage apparatus,automobiles,motorcycle. | ||||
Design and Construction
Test area and shelf
Test area is made of stainless-steel.
A stainless steel shelf is fixed above the sieve and funnel, you can put
test specimen on it.
Standard load of shelf is 50kg (If need greater load, confirm in advance).
Chamber inside equipped with power interface for test specimen.
Normal wire diameter is 50 um.
Normal width of a gap between wires is 75um.
Control Panel
5.7" programmable color touch display controller
99 programs 99 sections
R-232 interface
PC Link with software
Show total process time on controller.
Dust circulation
During test, dust is blown in test area by air motor, and then fall in funnel,
and re-cycle blowing by circulating pump to achieve dust circulation test.
Bottom of chamber is fitted with circulating pump, vacuum pump, motor.
Vacuum system
Some test specimens need to be vacuum.
Bottom of dust chamber is fitted with vacuum pump, a pressure gauge,
air filter, pressure regulator, connecting tube which one side to connect
pump, one side connect to test specimen.
Safety protection
Independent over-temperature protection,
Over-current protection
Earth leakage protection
Motor overheating protection
Phase-lack protection
Power supply and Wiring
380V, 50 Hz 10% +/-
Three-phase five little system
Package with Export Standard Wooden Box
Can be used for Sea, Air,Railway, Truck transportation.
| Model | Packing Dimension | Gross weight | Delivery Time |
| DI-800 | 1500*1800*2200 mm | 530kg | 20days |
| DI-1000 | 1700*1900*2200 mm | 700kg | 20days |
| DI-1500 | 1400*2050*2000mm | 800kg | 20days |
| DI-2000 | 1650*2350*2400mm | 950kg | 20days |
Installation
Environment conditions
Temperature:5 ℃ --35 ℃ , Relative humidity: ≤85%, pressure: 86kPa—106 Kpa
Space conditions
Chamber shall be installed on flat floor, with good ventilation
No combustible material, explosive material or strong vibration around.
No direct sunlight or other heat sources direct radiation.
No strong airflow around.
No strong electric field around.
Warranty & service
Warranty period: 3 years
Service:
| Our company will repair the product, if the product, the material of the parts, the design and manufacturing of the products made by our company arise hardware problems caused by product itself rather than human error within three years warranty period since the date of delivery. |
| Firstly, we can provide the spare parts with you. And also provide the solution about the trouble of the products. |
| Secondly, Please send back the apparatus, which will be repaired by our company. |
| Lastly, we would like to appoint our technical engineer to your company to repair the apparatus. |
Contact US:
Ms.Wendy
Company Name: Xian LIB Environmental Simulation Industry
Add: No.5 Zhangba First St, Xian High-Tech Area, Shaanxi Province P.R. China 710065
Tel: +86 (0)29 68918976 Fax: +86 (0)29 68918977
Email:Wendy@lib-industry.com
Skype: wendy.lib
