|
[China]
Trade Verify
Address: No. 1181, Zhaoxian Road, Jiading District, Shanghai city
Contact name:Shelly Xiao
Shanghai Liangui Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
20 channel SAEU3H Acoustic Emission System with network module card for NDT Testing
Hard disk parameters of 20 channel SAEU3H
|
| The maximal acquisition frequency is 10M dolt/s, sample rate can be adjusted continuously, and each channel can be set independently. |
| Acquisition accuracy | 16- bit |
| Data transferring Rate | The maximum data transferring rate of single USB3.0 interface is higher than 300MB/S, the maximum data transferring rate of two separate USB3.0 interface is higher than 600MB/S. |
| Acquisition of continuous waveform
| Acquisition frequency10M/S,16-bit accuracy,15 channels acquisition of continuous wave |
| Data acquisition of broad channel | Acquisition frequency:10M/S,accuracy 16-bit,data acquisition of 200 channels, data storage won’t be lost. |
| Channel quantity of acquisition card | Each acquisition card has four independent channels. |
| Storage capacity of acquisition card | 1 GB for each acquisition card |
| Acquisition case | Two kinds of basic machine case:4 channels20 channels,48 channels |
| Channel expansion | Several cases can be cascaded and form 200 channels AE system, each case can be used as independent host machine. |
| AE signal processing | Each hard disk of acquisition card obtains AE parameters characteristically, can be extracted in real time, its channel can be set up independently. |
| Acquisition length of the waveform | The maximum acquisition length of single waveform, sample rate of each channel can reach 128k at the same time, also the channel can be set independently. |
| Pre-acquisition function of the waveform | Pre-triggering, preliminary acquisition length can reach 128±10V k sampling point , the channel can be set independently. |
| AE input signal range | ±10V,downward adjusting signal range can be ±5V,±2V,±1V,±0.1V,the channel can be set independently. |
| Response frequency | 1kHz-2.5MHz(-3dB band width) |
|
| 20kHz,100kHz,400kHz three High pass filter, 100kHz,400kHz,1200kHz three low-pass filter, customer can choose different combination, can set up one by one independently. |
| Real-time digital filter of hardware
| The parameters of direct-pass,direct-pass,high-pass,low-pass,ban-pass and band-hinder can be set up at random between 0kHz-2MHz. |
| Noise of main machine | <15.7dB (no-load) |
| Dynamic range | 84.3dB |
| The Maximum signal range | 100dB( using 40dB preamplifier, the sensor output is 100 mAh) |
| Input impedance | 50Ω |
| AE parameters | Threshold arrival time,peak magnitude arrival time,amplitude,ring counts,duration,relative energy,absolute energy,signal intensity,rise counts,rise time,RMS,ASL,initial phase,12 outside parameters,Frequency Centroid,peak magnitude frequency,5 partial power spectrum,original frequency,resounding frequency,average frequency |
| External parameter acquisition | Standard layout of this instrument is with 8 analog signal channels, maximally can be expanded to 96 channels. The total sample rate of external parameter achieves 1M sampling spot per second. Acquisition accuracy of the external parameter is 16-bit, parametric input -range is ±10V, and can be changed into physical unit of signal source. |
| Alarming output | The main outputs the alarming controlling signal through switch and light. |
| Case size | 308mm×225mm×133mm (length×width×height) |
| Working temperature | 10℃~+45℃ |
Precautions:
1) The network card occupies one acquisition card slot, and can only use No. 1 slot.
2) After using the network card, the SAEU3-A chassis supports up to 4 cards and 16 channels, and the SAEU3-Bchassis supports up to 11 cards and 44 channels.
3) SAEU3H support USB3.0 and Ethernet two interfaces, but at the same time can only use one interface to connect with the PC;
4) The system default connection USB3.0 interface, if you need to use the Ethernet port, you must first disconnect the USB interface, and then connect the Ethernet interface;
5) When using the network card Ethernet interface to connect the PC, it is necessary to pay attention to establish the connection and identify the acquisition card takes some time, about 3 seconds / card;
6) USB3.0 port data bandwidth of not less than 300MB, Gigabit Ethernet port data bandwidth of not less than 80MB;
7) Network card indicator integrated in the RJ45 socket, which is defined with the standard card;
8) Please use the attached cable first, since the purchase of network cable, please select the above five categories above.
Company information:
Shanghai Liangui Technology Co., Ltd. is committed to promoting the prosperity and development of the world through technology, focusing on Intelligent Equipment & Automation Solutions to to help enterprises to improve production process and minimize the cost.
We are an intelligent equipment & automation solution integration service provider. Our company has a professional foreign trade sales team and an experienced technical support team, the principles of our team work is customer first and fast solution. Our business scope includes NDT Testing Equipment, Acoustic Emission Testing Instruments, Industrial Robot, Mechanical and Electrical Equipment etc.
Our NDT testing division is specialized in the R & D, production, sales and technical application services of Acoustic Emission Testing Instruments, Ultrasonic Flaw Detector, Ultrasonic Thickness Gauge and other Testing Instruments. Our R&D team has the ability to develop Sensors, Electronic Measurement Software and Hardware, we can also customize Non-standard Automated and Robotic Inspection Equipment for customers. Our products mainly used in Industrial Field (Aerospace, Railway, Automotive, Oil & Gas, Manufacturing, Process Industry ) and Power Generation (Renewable, Nuclear, New Reactors, Advanced Reactors, Research Reactors, Gas Combined, Coal, Cogeneration).
Our objective is to always help our clients meet their high safety standards, proposing efficient inspection solutions based on global services which reduce costs and increase process efficiency, make industrial facilities and power generation to operate safely, efficiently and excellently. Our major products AE system and instruments have been sold to China, USA, UK, Brazil, Indonesia and so on, which win the trust and support of customers from all over the world with an excellent reputation.
Packaging & Shipping
1.What is the price term?
FOB Guangzhou.
2.What’s the warranty time?
12 months after shipment date
3.What’s the delivery date?
10-30 days after receiving the 100% T/T advanced payment.
4.How to deal with the faulty part if exceeds the warranty time?
Customer can return the faulty parts for our testing and maintaining, all the logistic fee should be at customer’s cost.
