Heat transfer vinyl film
The heat transfer cutting vinyl films are applied on all light
& dark fabrics such as: Cotton, cotton-polyester, wool, linen,
Lycra, and some polyester athletic mesh knit fabrics. Its soft
hand, strong adhesiveness, excellent durability and washability are
specially engineered for applying to T-shirts.
Reflective film in t-shirt is used for road safety signage warning
at night.
Specification:
Temperature: 155~180 C
Time: 15~20 seconds
Size: 50cm (Width) * 25M (Length)
Application: Sports teams, uniforms, T-shirt, Jacket, Caps,
Umbrella, Towel, Bay etc.
Printing & Transferring Instructions
1. Use on 100% polyester, 100% cotton, All poly/cotton blends,
Lycra, Most nylons, Spandex, and Leather
2. Set the heat press to 165 degree, 12seconds with medium pressure
35-40 PSI
3. All designs must be cut in mirror.
4. Trim off the unneeded part.
5. Be sure the temperature and time is correct as recommended
above, Press fabric first if necessary to ensure flatness, then
Place the vinyl cut side facing down in desired position on fabric,
and transfer with firm pressure.
6. Peel off the transparent carrier sheet when it becomes warm.
T-shirt heat transfer samples.