|
[China]
Trade Verify
Address: ROOM 803, CHEVALIER HOUSE, 45-51 CHATHAM ROAD SOUTH, TSIM SHA TSUI, KL, HK
Contact name:Michael Yang
COMI LIGHTING LIMITED |
|
Verified Suppliers
|
|
|
C4YB0657(Single Color) and C4YB0618(RGB) 6 * 2W 24VDC Asymmetrical IP68 LED Underwater Swimming Pool Light 3
- in -1 RGB or Single Color
Features and Benefits:
1. 24VDC working voltage, safe to use;
2. Use the Silcone with good stickiness and thermal effect for
reach the purpose of radiating and prevent moisture;
3. Built-in Radiator helps prolong lifespan of LEDs;
4. Made of molding 316 Stainless Steel resistant to
corrosio;
5. IP68 Waterproof, can be submersed and installed into water,
depth less than 1meter;
6. Optional lens: Symmetrical or asymmetrical lens;
7. Easy to install by Recessed PVC mounting Sleeve (included).
Warning:
Must be installed underwater to prevent the light from burning up
because of over-heating.
Material specifications
| Front cover&Housing | Molding shaped sus 316L# stainless steel housing |
| Gasket | EPDM gasket |
| Glass | Step tempered glass. T=9mm |
| Lens | Optical lens, efficiency≥85% |
| Cable gland | IP-68 PG-11 copper with nickel-coated |
| PCB | Excellent heat conductivity aluminum, coefficient of heat conductivity≥2.0w/mk |
| Driver | Constant current output Single color LED=1-circuit output RGB 3in1 LED=3-circuit output |
| Application environment: | Temperature of water between -20℃~40℃, less than 1 meter depth. |
| Power cable | H07RN-F 2X1.0mm^2 L=3m (for Single color) H07RN-F 4X1.0mm^2 L=3m (for RGB) |
| Mounting sleeve | PVC |
Technical Information:
| Item No. | Light Source | Lens | Beam Angle | Input Voltage (V) | Typical Operating Current(mA) | Typical Power (W) | Typical Luminance (lm) | IK |
| C4YB0657 | 6*2W Osram | C8 | 30°|45° | 24VDC | 700 | 16.8 | Cool White=1234 Warm White=906 | 08 |
| C4YB0618 | 6*3W 3-in-1 RGB Full Color | C8 | 30°|45° | 24VDC | R=300 G=350 B=350 | 24 | 420 | 08 |
Dimensional Drawing(mm):
Optical Lens Options:
 | ||
| Built-in Radiator | Use the Silcone with good stickiness and thermal effect for reach the purpose of radiating and prevent moisture | Water must be allowed to go inside and outside sleeve freely without leaking from the other side. |
