Active Member
|
[China]
Address: 10th Floor | Litong Semiconductor Industry Park | Shapuwei Community ,Songgang Town,Bao'an Dist | Shenzhen 518103,Guangdong Province,RPC
Contact name:David Lau
DUALRAYS LIGHTING Co.,LTD. |
|
|
Model No. | DR-FL050-CGXX | DR-FL100-CGXX | DR-FL150-CGXX | DR-FL200-CGXX | DR-FL300-CGXX |
System Watts/W | 50W | 100W | 150W | 200W | 300W |
System Efficiency/LPW | 120~125LPW | ||||
Lumen Output/lm | 6.500±5% | 12.500±5% | 18.750±5% | 25.000±5% | 37.500±5% |
Rated Input Voltage/V | AC200~240V, 50/60Hz /(AC100~277V, 50/60Hz Optional) | ||||
LEDs Light Source | SMD3030 | ||||
SDCM | <5 | ||||
CCT/K | 5000K for Standard (3000K/4000K/5700K/6500K Optional) | ||||
CRI/Ra | >70Ra (>80Ra for Option) | ||||
Power Factor | >0.95 | ||||
THD | <10% | ||||
Beam Angle(Optional) | Symmetrical 30°/60°/90°/120°,Asymmetrical/Type II / Type III / Type IV beam angle optional | ||||
UGR | <25 | ||||
Surge Protection | 6~10KV SPD built in Driver,Exterior SPD 20KV Meanwell Optional | ||||
LED Driver | Sosen,Meanwell ELG / HLG Optional | ||||
IP Rating | IP65 | ||||
Dimming(Optional) | 1-10V, DALI,PWM,Zigbee for Option | ||||
| Safety Protection | Open Circuit / Short Circuit / Over-voltage / Over Temperature Protection | ||||
| Sensor (Optional) | Motion Sensor | ||||
Protection Class | ClassⅠ | ||||
Finishing Color(Optional) | Black RAL9017(Standard) / White RAL9016 Optional | ||||
Material | Aluminum+Toughened Glass | ||||
Lifespan/hrs | 62.000 Hrs (Ta=30℃@L70) | ||||
Operation Temp/℃ | 40°C to + 50°C(-40°F to 122°F) | ||||
Storage Temp/℃ | - 40°C to + 65°C(-40°F to 149°F) | ||||
| Switching Cycles | 100,000 Times | ||||
Certificate | CE(EMC+LVD),RoHS,ENEC ,D-Mark,SAA,RCM Available | ||||
Character/Power | 100W | 150W | 200W | 240W | 300W |  |
A / mm | 389 | 389 | 437 | 493 | 582 | |
B / mm | 297 | 297 | 346 | 379 | 444 | |
C / mm | 57 | 57 | 57 | 57 | 60 |
Model No. | Net Weight/Kg | Outer Carton Size/mm | Gross Weight/Kg | QTY”/CTN |
DR-FL050-CGXX | 3.6 | 355*350*165 | 4.5 | 1PCS/CTN |
DR-FL100-CGXX | 3.8 | 355*350*165 | 4.7 | 1PCS/CTN |
DR-FL150-CGXX | 4.5 | 415*410*175 | 5.8 | 1PCS/CTN |
DR-FL200-CGXX | 5.7 | 475*470*195 | 7.3 | 1PCS/CTN |
DR-FL300-CGXX | 9.3 | 475*470*195 | 11.5 | 1PCS/CTN |
Q1.What’s CCT(colour temperature) ?
RE: The description used to describe the effect of heating an object until it grows incandescently. The emitted radiation, and apparent colour, changes proportional to the temperature; easily envisioned radiation, and apparent colour, changes proportional to the temperature; easily envisioned ,when considering hot meal in a forge that glows red, then orange, and then white as the temperature increases.
Q2.What’s the fire rating categories ?
RE: VO-Burning stops within 10 seconds on vertical specimen; drips of particles allowed as long as they are not inflamed.
HB-Slow burning on a horizonal specimen’s burning rate <76mm /min thickness <3mm or burning stops before 100mm.
TP(b)-Slow burning rate <50mm / min for thickness <3mm.
TP(a)-Self extinguishes and flaming and afterglow should not exceed 5 seconds once source the source of flame is removed.
Q3.Why we use the high power LED?
RE: A high power LED, sometimes referred to as a power LED, is one that is driven at current of 350mA or higher.
Q4.What’s efficacy about the light ?
RE: The light output of a light source divided by the total electrical power input to that source, expressed in lumens per watt(lm/w).
Q5.What’s LED Chips ?
RE: The light producing semiconductor device that may or may not be incorporated into an LED.
Q6.What’s LGP(PMMA)?
RE: A key component to maximize the uniformity of light, to make the backlight slim and to reorient the line or dot light source such as LED to the plate light source.
