Home Companies Phoenix (suzhou) electronic Co.,ltd

3V 65-70LM SMD 2835 LED Chips Led Full Spectrum 150MA Hotel Lighting

Phoenix (suzhou) electronic Co.,ltd
Active Member

Contact Us

[China] country

Address: Bld#20,NO 88 Lingshan road ,wuzhong district,suzhou, jiangsu ,China

Contact name:Mini

Inquir Now

Phoenix (suzhou) electronic Co.,ltd

3V 65-70LM SMD 2835 LED Chips Led Full Spectrum 150MA Hotel Lighting

Country/Region china
City & Province suzhou jiangsu
InquireNow

Product Details

Application Introduction:

 

LED bulb lamp adopts the existing interface mode, i.e. screw port and socket mode (E26 E27 E14 B22, etc.), and even imitates the shape of incandescent bulb in order to meet people's use habits. Based on the unidirectional light-emitting principle of LED, the designer has made changes in the lamp structure, so that the light distribution curve of LED bulb lamp basically converges with the point light source of incandescent lamp.

 

High-efficiency 3V 150MA 2835 65-70LM 6500K PCT SMD LED CHIP Strip Supermall Hotel lighting

 

Quick details:

 

Input Voltage(V):3V
Warranty(Year):2-Year
Type:Smd Led Chip 2835
Lighting solutions service:Lighting and circuitry design
Luminous Efficacy(lm/w):150lm/w
Lifespan (hours):50000
Working Time (hours):20000
Chip Material:INGAN
Emitting Color:2700-6500K
Power:0.5W
Viewing Angle(°):120 Degree
Color Rendering Index(Ra):80
Packing bag:220*240nm
Place of Origin:Suzhou ,jiangsu
Application:LED STRIP 
Package Type:Suface Mount Package
Forward Current:150MA
Size:2.8*3.5*0.65mm
Packing:4000 Pcs/Roll


Product specification:

 

Package Structure

Absolute Maximum Ratings

 

ItemSymbolAbsolute Maximum RatingsUnit
Forward CurrentIF150mA
Reverse VoltageVr5V
Pulsed Forward CurrentIFP*180mA
Power dissipationPD0.5W
Operating TemperatureTOP-40~85
Storage TemperatureTST-40~85
Electrostatic DischargeESD2000(HBM)V
Junction TemperatureTj120
LED Thermal resistanceRth s-j33℃/W

 

Typical Electro-Optical characteristics curves:

 

LED Reliability Test List

 

Test ItemTest ConditionsStandardQty(Pcs)Ac/Re
Life Test25℃,1000Hrs@150mA/200/1
High Temperature85℃,1000Hrs@150mA/200/1
Low Temperature-40℃,1000Hrs@150mA/200/1
High Humidity Heat

85℃,85%RH,

1000Hrs@150mA

/200/1
Low Temperature Storage-40℃,1000Hrs

JEITA ED-4701

200 202

200/1
High Temperature Storage100℃,1000Hrs

JEITA ED-4701

200 201

200/1
Temperature Cycle(-40'C 30mins --25'C(5mins)--100'C(30mins) ,Temp changing rate:3+/-0.6'C/min)

JEITA ED-4701

100 105

200/1
Thermal Shock-40'C(15mins) --100'C(15mins),changing time <5mins ,300CMIL-STD-202G200/1

Pulse Life Test

 

Tp=1ms,DC=0.1,D=Tp/T @ 3×150mA/200/1
ESD Test(HBM)2000V,200V/Step, Forward & Reverse Test both 3times

AEC

(Q101-001)

200/1
Soldering Resistance

260±5℃,10S,3times

Pre-treatment 30℃,70%RH

JEITA ED-4701

300 302

200/1
Reflow IV Decay

260±5℃,10S,1time

Pre-treatment 30℃,70%RH,168Hrs

/200/1
Judgment Criteria
Forward Voltage VFVF Max-Increase < 1.1x
Reverse Current IRIR Max-Increase < IRmax
Luminous Intensity IVIV Decay < 40%

※Solder ability test criteria:coverage is not less than 95%

Note:Measurement shall be taken after the tested samples have been returned to normal ambient conditions (generally after two hours)

 

Packaging:

Cautions:

The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the

Top of package. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions Should be taken to avoid the strong pressure on the encapsulated part. So when use the picking up nozzle,The pressure on the silicone resin should be proper.


Soldering iron :
 When hand soldering, the temperature of the iron must less than 300℃ for 3 seconds
 The hand solder should be done only one times

SMT Reflow Soldering Instructions SMT :
Reflow soldering should not be done more than two times
When soldering , do not put stress on the LEDs during heating
The recommended reflow soldering profile as following

Handling Precautions :
Handle the component along the side surface by using forceps or appropriate tools
Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry
Do not stack together assembled PCBs containing LEDs. Impact may scratch the silicone lens or damage the internal circuitry

 

 

Product features:

 

Adopt good quality chip and frame ,antistatic good stability Ultra low attenuation

High brightness ,low attenuation high color rendering

Minimum 70,80,90 95 CRI options

Strong welding and good stability undead light

Product series and company logo on the front

CE ROHS LM80 Certification

 

Production Process:

 

 

 

 

 

 

 

Hot Products

Application Introduction: The brake lamp is generally installed at the rear of the vehicle. The main ...
3V 60MA 3014 RED LED Chip Light 620-625NM 0.2W For Elevator button light Application: Elevator ...
High Ra 95 2835 zero blue ray full spectrum teaching room light Application Introduction: The blue ...
Small size Low power consumption 1808 used for charger bank light Small size: LED is basically a ...
2835 SMD 6v Led Chip 150ma Led 6000-6500k 130-140lm For Ceiling Lamp Application Introduction: ...
3V 2835 Red Chip Bright Led For Road Traffic Signal Lamp Application Introduction: Road traffic ...