|
[China]
Trade Verify
Address: 1201, Jiaxiye Plaza, No. 328, Minzhi Avenue, Longhua New District, Shenzhen, Guangdong, China
Contact name:Jason
Shenzhen Bako Vision Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Indoor Digital Signage Advertising LED Screen P2.5 Front Service Video Wall for Commercial Place
BIF Series (BIF.pdf)
Indoor Digital Signage Features
· P2.5/P3/P4/P5.
· Steel/Die-casting aluminum Cabinet.
· Back/Front Service.
· 1920/3840Hz.
· Application: Meeting room, Exhibition room, Control room, Supermarket, Hotel lobby, Company reception, Classroom, Cinema, etc.
Front Service LED Screens Parameters:
| BIF-3 | BIF-4 | BIF-5 | |
| Physical Pitch | 3mm | 4mm | 5mm |
| Pixel Configuration | SMD 2121 | SMD 2121 | SMD 2121 |
| Pixel Density | 111,111 pixels/m² | 62,500 pixels/m² | 40,000 pixels/m² |
| Module Dimensions (W × H) (mm) | 192 × 192 | 256 × 128 | 320 × 160 |
| Panel Dimensions (mm) | 960 × 960 | 1024 × 768 | 1280 × 960 |
| Physical Resolution of Module (W × H) | 64 × 64 | 64 × 32 | 64 × 32 |
| Physical Resolution of Panel (W × H) | 320 × 320 | 256 × 192 | 256 × 192 |
| Panel Material | Steel / Aluminum | Steel / Aluminum | Steel / Aluminum |
| Scan Method | 1 / 32 Scan | 1 / 16 Scan | 1 / 16 Scan |
| Gray Scale | 16 bit | 16 bit | 16 bit |
| Colours | 281 trillion | 281 trillion | 281 trillion |
| Contrast Ratio | 4,000 : 1 | 4,000 : 1 | 4,000 : 1 |
| Average Power Consumption | 120 W / m² | 120 W / m² | 120 W / m² |
| Max Power Consumption | 400 W / m² | 400 W / m² | 400 W / m² |
| Operating Temp/Humidity | .-10℃ - 60℃ / 10% - 60% | ||
| Storage Temp/Humidity | .-30℃ - 60℃ / 10% - 60% | ||
| Refresh Rate | >1,920 Hz | >1,920 Hz | >1,920 Hz |
| Brightness | 900 - 1,200 nits | 900 - 1,200 nits | 900 - 1,200 nits |
| Horizontal Viewing Angle | 160° | 160° | 160° |
| Vertical Viewing Angle | 140° | 140° | 140° |
| Expected Lifetime | 100, 000 Hrs | 100, 000 Hrs | 100, 000 Hrs |
| Servicing | Front /Rear | Front /Rear | Front /Rear |
| IP Rating | IP 21 | IP 21 | IP 21 |
Advertising Video Wall Applications
1. Production in factories – you could use LED displays to show the production information of the factory. In this way, you can easily keep track of your production and do the necessary adjustments.
2. Display for trading rooms/call centers – these LED signs can be used to display relevant information for people inside trading rooms to use. For example, stock values, time zones, calls on queue, etc…
3. As a scoreboard – well this one’s pretty common too. LED scoreboards are commonly being used in any sports area or any sports location.
4. Retail purposes – retail businesses can use LED signs to promote their latest productions or any discounted ones.
5. Reception boards – you can use floor-standing LED screens to welcome guests in your office, hotel or even in your own home.
P2.5 LED Display Installation Type
· Hanging Installation.
· Wall Mount Installation.
· Standing On The Floor Installation.
What do you need to consider before buying an indoor LED Screens ?
1. View angle – You need to think about how the screen will be viewed by your audience. Does it need to be seen from any angle? Do you need a wider screen to display everything you will need? These is something you will need to consider.
2. Brightness – The standard brightness for indoor is 800-1200 nits, so you will need to make sure that the indoor LED screen you get is somewhere around that brightness range.
3. Flatness – The standard flatness is ±1 mm. So make sure to ask if the LED screen falls under that standard. Normally, LED screens with die-cast aluminum cabinets are the best choice for indoor LED screens.
4. The type of LED you wanna use – There are two types of LEDs for indoor use. One is the white SMD LED and the other is the black SMD LED. The black SMD LEDs are used mostly for the pixel pitch which is lower than 5mm. If that’s the case, then it is best to choose the black LEDs.
5. Check if there are dead pixels – An LED screen is made up of many small pixel LEDs. So naturally, less dead pixels will result in a better display. There are ways to check if there are dead pixels. A simple internet search will lead you to several dead pixel tests you can do.
About Bako Vision
FAQ:
Q1. Are you trading company or manufacturer?
A: We are a professional led screen manufacturer.
Q2. What is your terms of payment?
A: T/T or Western Union 30% as deposit, and 70% before delivery.
Will show you the Professional Quality Control Photos before you
pay the balance. Then you could see everything by your eyes before
the shipment.
Q3. How about your delivery time?
A: Generally, sample needs 3-5 days, mass production time needs 1-2
weeks for order quantity more than.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping also optional.
Q5. Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty for your products.
Q6: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our
customers benefit ;
2. We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
Q7: How can I get technology support?
A:1. We could give you the free training in our factory, which
include system use, system maintenance and equipment protection
ect.
2. We could teach you by remotely if anything not clear.
