Home Companies DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD

Single Digit Hyper Red SMD 7 Segment LED Displays 0.40" Black Surface Face color

DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD
Active Member

Contact Us

[China] country

Address: Room 2711, Huishang Center, Jiahui New City, No. 3027 Shennan Middle Road, Futian District, Shenzhen City, Guangdong Province China 518033

Contact name:Chen

Inquir Now

DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD

Single Digit Hyper Red SMD 7 Segment LED Displays 0.40" Black Surface Face color

Country/Region china
City & Province shenzhen guangdong
Categories Advertising Screens
InquireNow

Product Details

DL1-PCB402XSRB.pdf

0.40" Single Digit Hyper Red SMD Displays 7 segment led display

  • Features:
  1. 0.40″(inch) digit height.

  2. Excellent segment uniformity.

  3. Sold state reliability.

  4. Industrial standard size.

  5. Low power consumption.

  6. The product itself will remain within RoHS compliant version.

  7. Low current operation.

  8. Easy mounting on P.C. board or sockets.

  9. Face color : black / gray .

  10. Polarity : common anode / cathode

  • Descriptions:
  1. The SMD type is much smaller than tradition type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
  2. These devices are made with white segments and black surface.
  • Applications:
  1. Suitable for indoor use.
  2. Audio equipment.
  3. Set top box.
  4. Game machine.
  5. Channel indicator of TV.

 

Device Selection Guide:

Model No.Chip MaterialSource ColorDescription
DL1-PCB402CSRBAlGaInPSuper Bright RedCommon Anode
DL1-PCB402ASRBSuper Bright RedCommon Cathode
 

        

  • Absolute Maximum Ratings at Ta=25℃
ParametersSymbolMax.Unit
Power Dissipation Per SegmentPD60mW

Peak Forward Current Per Segment

(1/10 Duty Cycle, 0.1ms Pulse Width)

IFP100mA
Forward Current Per SegmentIF25mA
Dating Linear From 50℃ 0.4mA/℃
Reverse VoltageVR5V
Operating Temperature RangeTopr-40℃ to +80℃
Storage Temperature RangeTstg-40℃ to +85℃
Soldering TemperatureTsld260℃ for 5 Seconds
 

 

  • Electrical Optical Characteristics at Ta=25℃
Parameters
Symbol
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
Iv
2.0
5.0
13.0
mcd
IF=20mA (Note 1)
Luminous Intensity Matching Ratio (Segment To Segment)
Iv-m
---
---
2:1
 
IF=10mA
Peak Emission Wavelength
λp
---
632
---
nm
IF=20mA
Dominant Wavelength
λd
---
624
---
nm
IF=20mA (Note 2)
Spectral Line Half-Width
△λ
---
20
---
nm
IF=20mA
Forward Voltage
VF
1.5
2.00
2.40
V
IF=20mA
Reverse Current
IR
---
---
100
µA
VR=5V
 

 

Notes:
Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

 

Company introduction:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, singel/dual/tri LED displays, 7 segment display, SMD led display, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.

 

 

Hot Products

0.75mm 2835 1W SMD LED Grow Light 660nm for Planting Light Phyto-lamps for Indoor Plants Features: ...
This is 1w High Power Infrared LED IR led light components wavelength 850nm infrared led 40 mil led ...
5mm Round Flickering LED Blinking RGB LED Full Color Flashing LEDs Part No. Chip Material Lens Color ...
380nm-780nm High Power 1W 3W Full Spectrum LED 450nm 660nm for Planting Light Phyto lamps Features: ...
0.75mm height led light Components 2835 Top View Hyper Red Chip LED for Indicator and backlight Know ...
1.90mm Top View Chip 3528 SMD LED blue SMD LED Cord Reel Work Light Flexible Strip Lighting in Rope ...