Dimmable LED Pixel Lamp Cosmetic Vanity Mirror Lights For Dressing Table

Dimmable LED Pixel Lamp Cosmetic Vanity Mirror Lights For Dressing Table

Waterproof Dimmable Mirror Lamp Bath Mirror Light Light Cosmetic Lights For Dressing Table

Specification

Phensonlighting Mirror Lights
1. 10 Bulbs per set, and 12W totally.
2. bulb space:33cm, bulb size: 45X45 X51mm
3. LED quantity: 8 LEDs/bulb, total 80 LEDs
4. LED chip brand: Epistar
5. G45 bulb type
6. bulb material :ABS lampholder and PC lampshade.
7. IP Rate: IP43
8. luminous flux :1000(lm)
9. light-adjustable/ color optional
10. Warm White 3000K,Cool White 4500K and Daylight White 8000K. switched randomly
11. With 5V 2A USB charging
12. With 3m HPR in the bottom of each LED Bulb, Can stick it well at any place
13. A single lamp maximum power is 0.8W.
14. Application: dressing room, indoor use

How to use our mirror light?
1. Cosmetic mirror or be installed surface treatment: should be sticky surface should be dry,clean,and no rust,oxidation,grease,dust and other pollutants.
2. According to the design of the number of mirrors and bulbs ,each bulb installation location, note the lamp spacing of up to 33 CM, the minimum spacing of about 15 CM.
3. Remove the product to determine the power and control switch to place the seat is appropriate to determine the first light paste location (with the control switch to connect the first line).
4. The bottom of the product is double-side adhesive tape tear off the film,and then affixed to the first lamp position ,forced down,so that double-side adhesive is pasted better. Make the tape and the bonding surface get full contact.

TIPS
1. it is recommended to choose 2A or above USB power adapter, mobile phone charger and other standard USB mobile power can be use.
2. The product uses double-side adhesive paste fixed,requiring installation of the bonding surface must be clean,dry,smooth,can not have rust and oil.
3. The wire can be adjustable through the winding between the base slot,and the bulb spacing can be adjusted between 15-33CM.
Reminded: When the bulb is pasted,you must press the product fbr - about 30 seconds,it takes 24 hours to achieve the best adhesive stength.
5 When you use the lights, you can adjust the color temperature and the brightness with the function buttons. And choose your favorite color!

Product details ,

Our Advantage:
1. We are professional manufactory, with our own production lines. Factory direct sale, no reseller making money
from prices fluctuation.
2. With more than 50 professional engineers, customize products for customer to meet different request.
OEM&ODM are welcomed.
3. On the basis of management innovation and technological innovation, we are committed to establishing
long-term and mutual benefit cooperation relationship with worldwide partners and customers.