|
[China]
Trade Verify
Address: 2F,Building 2 Guan Tian Technology park Beihuan Road Shiyan Town Bao an District ShenZhen,Guangdong,China 518108
Contact name:James
Phenson Lighting Tech.,Ltd |
|
Verified Suppliers
|
|
|
12V Color Changing Flexible LED Strip Lights , Dimmable LED Strip
Lights Multi Colour 5m
Descriptions:
The colour changing LED RGB Strip Lights use the colors Red, Green,
and Blue (RGB) to create over 16 million vivid color hues. All of
our LED RGB Strip Lights can be controlled with a basic RGB
Controller using pre-programmed modes or can also be controlled
using by DMX control giving you full control over your RGB Color
Changing LED Strip Lights. Browse through our selection of LED RGB
Strip Lights or feel free to give us a call if you are having
trouble finding the right LED RGB STRIP lights for your project.
Parameter :
Model No. | Color | Length | LED Q'ty | LED Type |
| PS5050-S60RGB-12 | RGB | 5m | 300/reel | SMD5050 |
| PS5050-S60R-12 | Red | 5m | 300/reel | SMD5050 |
| PS5050-S60Y-12 | Yellow | 5m | 300/reel | SMD5050 |
| PS5050-S60B-12 | Blue | 5m | 300/reel | SMD5050 |
| PS5050-S60G-12 | Green | 5m | 300/reel | SMD5050 |
| PS5050-S60W-12 | White | 5m | 300/reel | SMD5050 |
| PS5050-S60WW-12 | Warm white | 5m | 300/reel | SMD5050 |
Installation Information
1. There are designated solder pads (marked"+/-") for solder
connection. Note that the maximum soldering time is 10 seconds and
the highest soldering temperature is 260 degrees.
2. The smallest unit of our SMD5050 LED flexible strip is composed
of 3 LEDs. Each unit can be removed by cutting between the
designated solder pads.
3. A simpler installation is guaranteed by applying double-sided
adhesive tape on the back-surface of the strip.
Notes for applying double-sided adhesive tapes:
(1) Make sure the back-surface of SMD5050 LED flexible strip is
clean and dry, thus to guarantee better adhesive effect.
(2) Suitable pressure is needed after flexible strip is positioned.
But note that the LED flexible strip itself and all its components
may not be mechnically stressed.
(3) The minimum bending radius of our SMD LED flexible strip is
2cm. Smaller bending radium is also possible only if the circuit
board containing no electronic components. It would be better to
position the LED flexibel strip after bending to avoid cyclic
fatigue.
(4) Make sure the adhesive backing is removed completely.
Safety and Maintainance Information
1. SMD LED flexible strip itself and all its components may not be
mechanically stressed.
2. Don't damage or destory conducting paths on the circuit board
while installation.
3. To guarantee safety, only qualified personnel are allowed to
install LED strips.
4. Make sure SMD flexible strips are mounted to correct electrical
polarity.
5. Parallel connection is highly recommended for its high safety.
Serial connection is not recommended because unbalanced voltage
drop may damage SMD LED flexible strips.
6. Insufficient and unstable power supply may cause flexible strip
damage.
7. Don't install SMD LED flexible strips directly on metallic or
any other conductive surfaces.
8. Pay attention to standard ESD precautions when installing our
LED strip lihgts.
Note:
(1) Material corrosion will not be considered as material defect.
It's in user's responsibility to provide suitable protection
against material corrosion, including protection measures against
moisture and condensation, etc.
(2) Connectors are necessary if you want to connect the cut
sections together or connect a section to power.
Normal packing :
