|
[China]
Trade Verify
Address: 2F,Building 2 Guan Tian Technology park Beihuan Road Shiyan Town Bao an District ShenZhen,Guangdong,China 518108
Contact name:James
Phenson Lighting Tech.,Ltd |
|
Verified Suppliers
|
|
|
RE30 30° Series 850nm IR Light Emitting Diode Using For Security Equipment
Feature :
1. Dimension(length*width*height: mm): 3.0* 3.0* 3.03 mm
2. High Reliability
3. Low forward voltage .
4. Peak wavelenth : 850 nm
5. Moisture sensitivity level : 5a
6. Pb - free reflow soldering application
7. Rohs compliant
8. 2500pcs per reel
Package Dimmension :
Application :
Widely used in security monitoring, intelligent home, virtual reality, infrared projectors, car sensing, iris recognition, gesture recognition, equipment safety systems, medical equipment .
Description :
Widely used in security monitoring ,intelligent home ,virtual reality ,infrared projectors,car sensing ,iris recognition ,gesture recognition ,equipment safety systems ,medical equipment .
Parameter :
| Part No. | IF(mA) | VF(V) | Po(mW) | WD(nm) | View Angle |
| RE30A3-IRT-FS | 400 | 1.4-2.0 | 280-450 | 840-870 | 30° |
| RE30A3-IRX-FS | 500 | 1.4-2.0 | 280-450 | 840-870 | 30° |
| RE30A3-IQX-FS | 500 | 1.4-2.0 | 280-450 | 930-960 | 30° |
| RE30A3-IRA-FS | 700 | 1.4-2.0 | 450-710 | 840-870 | 30° |
Note:
1. 1/10 Duty cycle, 0.1ms pulse width.
2. The above forward voltage measurement allowance tolerance is 0.1V.
3. The below color coordinates measurement allowance tolerance is 0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the
absolute maximum rating of the product.
6. All measurements were made under the standardized environment of
Refond.
7.When the LEDs are in operation the maximum current should be
decided after measuring the package temperature,junction
temperature should not exceed the maximum rate.LED
Technical Support
Pass the international benchmarking enterprises and third-party SGS social responsibility audit, in line with EICC electronics industry code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other international standards in Third party testing result.
TS16949
ISO9001
QC 080000
ISO14001
OHSAS18001
ISO17025
We use scientific research and innovation as a driving force for
development, build the core competitiveness of enterprises, is
committed to every customer can get more secure, more
environmentally friendly products.
Laboratory
Experimental Center was established in 2013, covers an area of over
600 square meters
CNAS Certification
December 2015 CNAS certification, included in the national laboratory directory. For the company's technological innovation and product development to provide a complete means of testing, product quality management to provide a wealth of reliable test data.
