|
[China]
Trade Verify
Address: 2F,Building 2 Guan Tian Technology park Beihuan Road Shiyan Town Bao an District ShenZhen,Guangdong,China 518108
Contact name:James
Phenson Lighting Tech.,Ltd |
|
Verified Suppliers
|
|
|
3030 LED IP65 outdoor water proof led flood light 200W
1. Application:
Warehouses,construction sites,schools,parking lots,shopping malls,high-speed rail station,terminal,subway station.
2. Features
1. Less weight, copper pipe rapid cooling, high light efficiency, high cost performance;
2. Designed for various applications with120°precision refractive
optical reflectors,
Using high-bright 3030 LED chips and high-quality Meanwell driver;
3. Different protection levels available for various applications;
4. Phtoelectric sensors can be applied;
5. DIALUX simulation design available.
3. Technical Parameter
| Model | LED Brand | CCT | CRI | Luminous Flux | Size(mm) | System Power |
| PS-10W-3D | 3030 | 3000-7000K | 70/80 | 100-120LM/W | 166*116*32 | 10W±5% |
| PS-20W-3D | 3030 | 3000-7000K | 70/80 | 100-120LM/W | 216.5*152*40 | 20W±5% |
| PS-30W-3D | 3030 | 3000-7000K | 70/80 | 100-120LM/W | 226.5*167*40 | 30W±5% |
| PS-50W-3D | 3030 | 3000-7000K | 70/80 | 100-120LM/W | 310.5*220*50 | 50W±5% |
| PS-80W-3D | 3030 | 3000-7000K | 70/80 | 100-120LM/W | 354.5*245*55 | 80W±5% |
| PS-100W-3D | 3030 | 3000-7000K | 70/80 | 100-120LM/W | 402.5*295*60 | 100W±5% |
| PS-150W-3D | 3030 | 3000-7000K | 70/80 | 100-120LM/W | 430.5*330*60 | 150W±5% |
| PS-200W-3D | 3030 | 3000-7000K | 70/80 | 100-120LM/W | 470.5*360*60 | 200W±5% |
4. Size
5. Viewing angle
6. Installation Precautions:
Lighting installation location must have sufficient load-bearing
capacity, and its afford-ability must be able to withstand three
times more than the flood light weight. The lamps' working voltage
is High Voltage Alternating Current, should be far away from the
crowds and the easily accessible places, and take good security
measures--properly connect the groud wire, to avoid any accidents.
Lamps should be installed in ventilated areas, keep the lamp has a
good environment for better heat dissipation.
7. Package Details
| Item | Packing Size(mm) | N.W/G.W.(KG) |
| PS-10W-3D | 200*135*40 | 0.5/0.7 |
| PS-20W-3D | 250*180*48 | 0.8/1.0 |
| PS-30W-3D | 260*195*48 | 1.1/1.3 |
| PS-50W-3D | 355*255*58 | 2.1/2.3 |
| PS-80W-3D | 435*340*130 | 3.4/3.7 |
| PS-100W-3D | 480*390*135 | 4.2/4.6 |
| PS-150W-3D | 510*430*135 | 5.4/5.8 |
| PS-200W-3D | 555*460*135 | 6.4/6.8 |
8. Installation Caution
1. Turn off the power before maintenance.
2. Clean up the reflector rgularly to maintain the efficient light
transmission.
3. Clean up the dust of PC lens and heatsink to maintain the proper
cooling effect.
4. Do not use water or any corrosive liquid to clean the
lamp,preferly to use a dry cloth to avoid any damage to the lamp.
5. When installing or replaing or replacing the power
supply,directly use a screwdriver to open the driver back cover,and
then remove it.
Note: Please connect the three-core AC wire properly,the red
connect the FireWire,with the letter”L”indicates;blue with the
zero-line;With the letter”N”means;green or yellow for the
gound-wire,with the letter”G”represents.
