Active Member
|
[China]
Address: 9E, South Block, Baihui building, 3019 Sungang East Road, Luohu District, Shenzhen
Contact name:Liu
Shenzhen Everbright Lighting Technology Co., Ltd |
|
|
IP65 Double-Sided Azimuth Light / Railway Construction Signal Warning Light
| 1 | Rated voltage | V | 3.7 | ||
| 2 | Rated power | W | 1 | ||
| 3 | Rated capacity | Ah | 2.2 | ||
| 4 | Continuous working time | Long bright | H | ＞10 | |
| Slow flash | ＞48 | ||||
| Flash | ＞12 | ||||
| 5 | The average service life of the light source | h | ≥10万 | ||
| 6 | Charging time | h | 4 | ||
| 7 | Battery life cycle | 1000 | |||
| 8 | appearance | Length | mm | 88×77×270 | |
| Size | Short | mm | 88×77×160 | ||
| 9 | weight | length | g | 550 | |
| Short | 500 | ||||
Scope of application:
for railway, shipping, traffic management and special dangerous places and other scenes for mobile or fixed signal indications, warning signs, orientation indications and signal communication.
Performance characteristics:
◆ It can be used for hand-held mobile use, and it can also be used
magnetically attached to the surface of a metal body or buckled on
a thin wall for fixed use
◆ The light source adopts the international top brand LED light
source, which can send out a long light or stroboscopic warning,
signal or display direction in two opposite directions at the same
time, and the maximum visible distance in one direction is 1500
meters.
◆ Good sealing, strong waterproof performance, can work normally in
various harsh environments and climatic conditions in the field;
the protection level is up to IP66. The shell is made of
high-hardness aluminum alloy by precision CNC machining, and the
surface is anodized, which can withstand strong forces. Collision
and shock.
◆ High-energy non-memory lithium battery, large capacity, low
self-discharge rate, excellent charge and discharge protection
circuit design, safety and environmental protection, long life.
◆ Beautiful appearance. The structure is light and handy, and it
can also be magnetically attached to the metal surface.
Instructions:
◆ According to the needs of on-site use, determine the fixing method of the lamp. Generally, the lamp has the following methods of use: table placement, handheld, magnetic adsorption, etc.
◆ When in use, press the switch button under the lamp cap with your finger, press the first time, the light will stay on; press the second time, the light will flash slowly; press the third time, the light will go out; cycle in turn. In any state, long press for 3 seconds and the light flashes quickly, press again and the light goes out.
◆ When charging, insert the output plug of the charger into the charging socket under the lamp head to charge. The charger has a built-in charging protection device. When the charger is connected to the power supply and not charging, the indicator light is green. When the lamp is connected to start charging, The red indicator light indicates normal charging. When the charging indicator turns green, the battery is fully charged.
◆ Charge in time after each use to ensure that the battery is always fully charged. After a charge, it can be used at any time within 6 months. If it is left unused for a long time, it should be fully charged every six months.
Precautions:
1. Non-professionals are not allowed to disassemble the lamps at
will.
2. After using the lamp, please charge it in time.
3. Please plug the rubber plug after each charge.
4. Please use the charger provided with this product to charge.
