Maintenance Free Rechargeable Tripod Work Light 60w Integrated

Maintenance Free Rechargeable Tripod Work Light 60w Integrated

Maintenance-Free LED Light Source Ultra-Light Integrated Lifting Work Light For Railways

The EB8063 ultra-light integrated lifting work light (with USB interface) developed by the company in accordance with market needs is mainly suitable for inspection and maintenance work lighting in railways, steel, shipyards, power plants, power grids, petrochemicals and other industries

Performance characteristics:

◆ The light source adopts maintenance-free LED light source, with high brightness, average service life of more than 100,000 hours, and high efficiency and energy saving.
◆ The shell is made of aluminum alloy, with high strength and good heat dissipation.
◆ Excellent structure and sealing design, the protection level of the lamp is up to IP66, and the anti-corrosion level WF2, to ensure that the lamp can work reliably for a long time in various harsh environments.
◆ High-energy non-memory battery, large capacity, low self-discharge rate, can meet the needs of long-term use after a full charge.
◆ Equipped with protection functions against battery over-discharge and short-circuit, it is safe and reliable to use.
◆ The light pole and battery are integrated, which greatly reduces the weight of the whole lamp. The whole lamp does not exceed 5 kg, which is the lightest product of the same type in the industry, and it is convenient to push the belt.
◆ The lamp holder is designed with a small windward area and high thermal conductivity aluminum alloy. The angle of the lamp holder can be adjusted according to the customer's situation. The maximum height of the lamp pole is 2.2 meters, which can meet the needs of high-power lighting in the field under strong wind.
◆ The lamp has the function of working light and strong light, which can meet the needs of high-power emergency repairs and can also be used for low-power long-term lighting. The power display function on the lamp, four yellow lights flashing to indicate the full power state, three yellow lights flashing to indicate 75% power, two flashings to indicate 50% power, and one yellow light flashing to indicate 25% power. Charged up. The flashing yellow light can also serve as a safety warning seat, reminding that there is a light here.
◆ The lamp holder can be replaced with bare hands. In the case that the field cannot be charged, the spare lamp pole (spare battery) can be replaced to meet the long-term lighting needs in the field.
◆ When electric equipment such as (mobile phone, flashlight, etc.) needs to be charged urgently when there is no electricity, it can be charged through the USB interface of the device.
◆ The product can be carried in a backpack for easy storage.

Precautions:
◆ Non-professionals are not allowed to disassemble the lamps at will.
◆ After using the lamp, please charge it in time.
◆ Please plug the rubber plug after each charge.
◆ Please use the charger provided with this product to charge.

Instructions:
◆ Take the product out of the backpack and adjust the light pole so that its 3 corners are supported on the ground stably.
◆ When in use, use your finger to move the switch under the power box. When the switch is set to "I", it means the work light is on; when the switch is set to "0", the light is off; when the switch is set to "II" , On behalf of strong light. Then adjust the height of the light pole as needed.
◆ When the lamp is in use, the battery indicator flashes stroboscopically, and the 4 LED indicators are gradually turned off from full power. When only one LED indicator is on, it means that the battery is about to run out and prompts the user to charge the lamp in time.
◆ When charging, insert the output plug of the charger into the charging socket on the end of the power box to charge. The charger has a built-in charging protection device. When the charger is connected to the power supply and not charging, the indicator light is green, and when the lamp is connected to start charging , The indicator light is red indicating normal charging, when the charging indicator light turns green, it means the battery is fully charged.
◆ Charge in time after each use to ensure that the battery is always fully charged. After a charge, it can be used at any time within 6 months. If it is left unused for a long time, it should be fully charged every six months.
◆ When charging is not possible in the field, the lamp holder can be separated from the lamp pole by loosening the nut and replacing the spare lamp pole (spare battery).
◆ When the lamp is no longer in use, the pole of the lamp can be adjusted and stored in the backpack.