IP67 LED Drivers Power Supply Waterproof 24V 50W 2.1A Signboard Wall Light Box

IP67 Waterproof LED Driver 24V 50W 2.1A Wall Light Box Signboard LED Module

Quick Detail:

• Waterproof type for line light lighting box signboard light application.
• AC/DC switching 24V 50W 2.1A single-switch LED driver
• AC input voltage: 100~130V/170-250V
• 1600V High voltage test, full loading test and old aging test
• IP67 grade
• CE & RoHS approvals
• 3 Years Warranty
• Unit Size: 20.2*3.5*2.4CM & Unit Weight: 280g

Description:

Our products are widely used in LED industrial project, communications power, aerospace, industrial control systems, posts communications, medical equipment and other industrial and commercial fields. All these products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.

Line light, signboard light and lamp house light is special field, our rainproof series and waterproof series can meet this market and are warm welcomed. It all depends on users’ requirements. 

Specifications:

Notices:

1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).

2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.

3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

6. For safety, properly grounded, the output power cable must be ≥2.5mm²

7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

8. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed.

9. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof)

Ultra thin related models list as below:

A: Rainproof series for line light, signboard light and light box:

B: Waterproof series for line light, signboard light and lamp house:

C: Slim line and ultra thin types for lamp house/light box: