High Frequency DMX To PWM Dmx512 Master Controller For Constant Voltage RGBW Lights

High Frequency 10A*4CH Constant VoltageLED DMX512 Decoder

Model : DE8358                                                              Manual Download: DE8358 .pdf

SUMMARIZE:

The DMX512 Decoder series adopt the advanced micro-computer control technology. It can convert the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.

The DE8359 can output 1~6 Channels for option and each channel able to achieve 256 levels of brightness controlling,and also it can be used as the connector of PC digital-light controller and analog light modulator. It has been widelyly used in Landscaping and buildings lighting.

Product Features:

Meets DMX512/1990,with RJ45 interface and XLR to choose.

Can realize 256-levels brightness adjustment by the buttons.

Power without ashing, smooth at low.

Four ways of output channel, single channel maximum 10A output drive, total output is less than 40A.

Can achieve asynchronous color changes effect under working with controller.

With the light color selected mechanism, and be able to control the light with up to 4 colors.

Setting the DMX address freely by dip switch.

Customized available and 3 years warranty.

Technical Parameters:

Product Size :

Instructions about Connection:

1, DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512 controller input and output signal positive,signal nagative,signal ground with DE8358 input interface corresponding connection.

2, The DMX5000 output and DE8358's transmission lines can't be over 300 meters.

3, The DMX5000 each interface can connect with no more than 170 pieces of DE8358. Eight output interface. Through the JBLED FLASH light making software,it can realize infinite connectting the DMX lights with computer on-line controlling.

4, When contacting 32 pieces of DE85358, DMX signal must add a signal amplifier such as RE2000, cascade can't more than 4 PCS.

5, At the end of the connection, we should connect a DMX signal termination when putting on the the NO.10 dip switch of DE8358.