Active Member
|
[China]
Address: NO.1268 Xindian Road,Jiading Industrial Zone,Jiading District,Shanghai ,China.
Contact name:
Shanghai Jibang Electronic Technology Co., Ltd. |
|
|
6A*3CH RGB 433.92MHz RF Wireless LED Controller Touch Dimmer
SUMIRIZE:
DM9126 is the single channels product of 433.92MHz RF Wireless LED Dimmer Series. We also have other similar products with 1-4 channels for option. 433MHz is a normal frequence to realize wireless LED lighting controlling which can only reach one-to-one controlling. It can reach 20 meters controlling distance in the open space. It can go cross normal obstacle and satisfy common use in LED lighting. Much more easy to install and operation, beautiful appearance and rich function, this products will be your best choice of LED wireless controller.
This is RF433.92MHz LED dimming controller, using button control mode, the user can according to the actual needs, remotely adjust the light to the appropriate brightness. The remote control effect is stable, and the anti-interference ability is strong. One to one remote control can be realized. This controller is with 8 kinds of dynamic mode effect, 10 dimming function, 256 PWM precision, 10 level dynamic effect of adjustable speed, static adjustable brightness. At the same time, this controller has ultra-thin RF wireless remote control, the ultimate slim body, loop mode, host and remote shutdown, automatic memory function,etc.
Tech-parameters:
| 1, Remote Controller / Touch Dimmer | |
| Input Voltage | DC3V ( CR2032 batteries) |
| RFID | 433.92MHz |
| Control Mode | Press Buttons |
| Size | L86*W40*H7(mm) |
| Weight | 40g |
| 2, Receiver / LED Driver | |
| Input Voltage | DC12-24V |
| Output Si9gnal | Constant Voltage PWM Signal |
| Output Channels | 3 channels |
| Output Current Load | 6A/CH, Max 20A |
| RFID | 433.92MHz |
| Effective Control Distance | 30 Meters |
| Working Temperature | -20~55℃ |
| Size | L150*W45*H33(mm) |
| Weight | 80g |
Specifications of LED RF Wireless Controller Series:
| Model NO. | Input Voltage | Channels | Max Current Load | RF Frequence | Max Output Power | Shell Color |
| DM9009 | DC12-24V | 1CH | 20A*1CH | 433.92MHz | 240W(12V)/480W(24V) | Blue |
| DM9010 | DC12-24V | 2CH | 10A*2CH | 433.92MHz | 240W(12V)/480W(24V) | Blue |
| CO6001 | DC12-24V | 3CH | 6A*3CH,Max16A | 433.92MHz | 216W(12V)/432W(24V) | Blue |
| DM9121 | DC12-24V | 1CH | 20A*1CH | 2.4GHz | 240W(12V)/480W(24V) | White |
| DM9122 | DC12-24V | 2CH | 10A*2CH | 2.4GHz | 240W(12V)/480W(24V) | White |
| DM9123 | DC12-24V | 3CH | 6A*3CH,Max 18A | 2.4GHz | 216W(12V)/432W(24V) | White |
| DM9124 | DC12-24V | 4CH | 5A*4CH | 2.4GHz | 240W(12V)/480W(24V) | White |
| DM9125 | DC12-24V | 1CH | 20A*1CH | 433.92MHz | 240W(12V)/480W(24V) | White |
| DM9126 | DC12-24V | 3CH | 6A*3CH | 433.92MHz | 216W(12V)/432W(24V) | White |
Function Instructions:
1), Press this button to change the power-on and standby state,
plug in the power automatically back to the last shutdown
mode, under the state of operation at the same time according to
the code, ash express code successfully.
2), In the static mode, press this key, the controller will switch
to dynamic mode, in the dynamic mode, press this button to
circularly switch all kinds of dynamic effects.
3), Adjust the transformation speed of the dynamic mode: press
“SPEED+” to accelerate, press “SPEED-” to slow down.
4), In dynamic mode, press “COLOR+”, the controller will switch to dynamic color mode; in the static color mode, press “COLOR-” to switch all kinds of static colors circularly.
5), Adjust the brightness of the static color, press “BRIGHT+”
to increase the brightness, press
“BRIGHT-” to reduce the brightness.
6), Press “DEMO” switch to dynamic demonstration function, in the dynamic demonstration, the controller will automatically cycle demonstration of 9 dynamic mode, after each mode is performed 3 times,it will jump to the next dynamic mode, and in turn cycle.
Product Wiring Diagram:
Attentions of DM9123:
1. Please offer the receiver a input voltage of DC12-24V, not any other voltage
2, Please correctly connect the line according to the wiring diagram.
3, This product must not be overloaded.
