Active Member
|
[China]
Address: 3/4F,B Bld,Xinghong Inc.Park,XiXiang,Baoan,Shenzhen,Guangdong,China
Contact name:Charoltte
Shenzhen Superolux lighting Co.LTD |
|
|
200 W 85-265VAC led high bay shop lights high power outdoor UL driver
Description : 200W led high bay light is main item in superolux high bay light series .with
meanwell driver UL FCC Listed . high lumen output , IP65 rate , suitable for outdoor applications
200W led high bay light paramters
1 Electricity Parameters:
| Code | Items | Parameters |
| 1 | Input voltage | 90-305VAC 47-63Hz |
| 2 | Input Current | 0.97A(230V) |
| 3 | Power | 200W |
| 4 | Output voltage | 30V |
| 5 | Output current | 6.6A |
| 6 | Power Factor | >0.9 |
| 7 | Luminous Efficiency | ≥90% |
2,Optical Parameters:
| Code | Items | Parameters |
| 1 | Beam angel(H,V) | 120°/90°/45° |
| 2 | Peak intensity | 8500cd/12000cd/16000cd |
| 3 | Luminous Flux | 18000lm |
| 4 | Color Rendering Index | ≥70Ra |
| 5 | Color Temperature | 2800-3200K/4000-4500K/5500-6000K |
3,Physical Parameters:
| Code | Items | Parameters |
| 1 | working temperature | -40℃- 60℃ |
| 2 | IP | IP65 |
| 3 | N.W | 8.5Kg/8.3Kg/8.6Kg |
| 4 | Length | φ500mm /φ500mm /φ410mm |
| 5 | Width | |
| 6 | Height | 520mm/540mm/650mm |
Light distrubute curve :
Product Features :
1.Good Color rendering index:Ra>80,the goods looks elegant.
2.With constant current constant voltage control circuit,applied voltage width(AC90V-
305V),overcome the light instability because of no using
3..WorkingTemperature: -40 ~ 55 degrees Celsius,IP65 Grade.
4. Application tunnel,buildings,factory,warehouse,largesupermarket,sculpture,stadiums,squares,
Working Lifespan:>50,000Hours
5.Good Color rendering index:Ra>80,the goods ,stylish designing
6. CE.Rohs.GS.SAA .UL listed
200W LED high bay light installation instruction :
.1 It is forbidden to squeeze the top of the lamp, so as not to damage the lamp shade.
.2 Yellow green line to protect the earth, Blue wire is “N”, Brown wire is “L”.The joint must be fixed
with silicon gel and protected by a heat-shrinkable tube in case water leaks in.
.3 When installation, hanging ring must be tight, in case lead to the lamp body fall off
.4 Because this product uses the heat pipe thermal conductivity, so it is strictly prohibited collision fal
.5.When installing a lampshade, hang up the screws on the composite aluminum plate
suspended within 2-3 mm
.6.Install the lamp shade on the aluminum plate, screw corresponding with hole , then clockwise
rotating lamp shade, Let the nut into the chimney hole and lock it
7.7 As LED high bay use heat pipe technology , lamp must be hang perpendicular to the ground,
deflection Angle is not greater than 15 degrees. the wire rope on heat sink is used to protect
lamp body, to prevent fall off. The rope must be connected to the fixed building can bearing, to
avoid lamp body fall off lead to goods damaged or personnel injury
Product Picture :
Factory tour :
