|
[China]
Trade Verify
Address: Room 801, Building 1, Shenzhen Halcyon New Materials Co.,Ltd. No. 6, Jinlong 1st Road, Baolong Community, Baolong Street, Longgang District, Shenzhen,Guangdong Province, PRC 518118
Contact name:Alice
SHENZHEN ANHANG TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
High-intensity Type A Aviation Obstruction Light
High-intensity Aviation Obstruction Light
Type A Aviation Obstruction Light
Aviation Obstruction Light
This High-intensity Type A Aviation Obstruction Light flashing
white color 24 hours and designed for marking top of obstacle that
exceed 150 meters in height.Ultra high intensity CREE LED is used
for the light source ensure light’s long life experience and good
performance. Self-designed reflection board ensure less LED could
emitting brighter light.
Application
AH-HI-A0 High-intensity aviation obstrution light is used on the
top of the High-rise Building, High Chimney, marking towers
(Telecom, GSM,Microwave & TV),High Pole, Tower Crane, Wind
Turbine, etc when the obstacle height is more than 150meter, and
most time work with low intensity lights & medium intensity
light installed on the lower place.
Compliance
** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 High
Intensity Type A Obstruction Light
** FAA L-856
Electrical
* CREE ultra high intensity LED as light source saving power
* Power supply available in DC(48V) or AC(110V, 240V)
* Unique design and UV protected polycarbonate lens for converging
light and saving LED power
* UV protection Powder coated bright yellow color base make better
visibility
* Base material is powder coated die-casting aluminum which has
strong corrosion resistance, Shock and Vibrations protection
* Special valve installed beside the base to make sure the air
could go through but water is avoid, so that the whole light
temperature won’t be high to destroy the light
System design
Built-in photocell for day/twilight/night operation
Surge and lightning protection
Optional
Alarm contact for remote monitoring
Infrared LED for pilot using NVG
GSM cellphone monitoring
RS485 communication part for monitoring
User adjustable flashing rate(40, 50, 60 flashes/minute)
GPS synchronization
More detailed parameter:
| Body Material | Polycarbonate |
| Base Material | Powder coated die-casting aluminum |
| Mounting | θ190×θ12 |
| Weight(kg) | 6 |
| Product Life Expectancy | 5 years Plus |
| Humidity | 0%-100% |
| Wind Speed | 80m/s |
| Waterproof | IP67 |
| ICAO | Annex 14 Volume 1,'Aerodrome Design and Operations’ Sixth edition 2016, table 6.3 High-intensity Type A White Obstacle Light |
| FAA | L-856 |
| NVG(Night Vision Goggles) compatible LED | |
| Options Available | GPS Sync Flashing, Dry Contact alarm(NO COM NC) |
| User adjustable flashing rate (40, 50, 60) |
