LED Aviation Obstruction Light High Bright Tower Obstruction Lighting CREE High Intensity LED Source

 LED Aviation Obstruction Light High Bright Tower Obstruction Lighting CREE High Intensity LED Source
 
Features

Electrical

l CREE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or halogen lamp

l Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)

Physical

l Unique design and UV protected polycarbonate reflector for converging light

l UV protection Powder coated bright yellow color base make better visibility

l Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection

l Special valve installed beside the base to make sure the air could go through but water is avoid, so that the whole light temperature won’t be high

System design

l Built-in photocell for day/night operation(dusk to dawn operation)

l Surge and lightning protection

Optional

l Dry contact Alarm output for remote monitoring

l GPS synchronization

l Infrared LED for pilot using NVG

Application

l AH-MI-A2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 105-150 meters, and most time work with low intensity lights & medium intensity type B light installed on the lower place.

 
Applications
 
This product is mainly used on the top of high-rise building or structures, e.g. Television transmitting tower, Broadcast Tower, High-rise Building, Tower Crane, and cable stayed bridge communications Tower etc which
height is between 105 meter and 150 meter so that it can play a warning role in potentially hazardous obstructions to air traffic flashing white safety light.

 
Main Parameter

Function

This is Single light with Photocell. It can work automatically all day by photocell. This light can change intensity automatically .During the day, White Flashing, light intensity is 20,000cd;At night, White Flashing, light intensity is 2000cd.
 
Advantages

1. lightweight low wind built-in photocell and monitoring-no additional power supply
2. Integrated automatic flash synchronisation beam optical design
3. high accuracy light beam optical design
4. High borosilicate glass material with good thermal stability, high transmittance.
5. Built-in circuit protect LED, extremely reliable and cost saving.
6. Shockproof and corrosion resistant. It can be used in very poor conditions.
7. International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100000hours.
8. Resistant to heavy rain or storms.
9. Free maintenance and aluminum alloy Material.
10. Five year warranty
11. low power consumption and low cost of ownership.
 

Product picture

 
Compliance

Medium-intensity Type A and FAA L-865
Medium-intensity Type A Aviation Obstruction Light, ICAO Annex 14 Volume 1,'Aerodrome Design and Operations’ Forth edition July 2004,table6.3