|
[China]
Trade Verify
Address: Room 801, Building 1, Shenzhen Halcyon New Materials Co.,Ltd. No. 6, Jinlong 1st Road, Baolong Community, Baolong Street, Longgang District, Shenzhen,Guangdong Province, PRC 518118
Contact name:Alice
SHENZHEN ANHANG TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
White Helicopter Landing Lights for Taxiway AND Touchdown and Lift - off Area
Detail Description:
This light is a steady burning green or yellow light inset
installing light. Emitting Omnidirectional green or
yellow light at night or in the daytime with low visibility
to Indicate the perimeter of heliport final approach and
taking off area, to indicate the safe Landing area for
helicopter pilot.
Datasheet: AH-HP-I Heliport Inset Light.pdf
Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles.
It could be used as Aiming point light, perimeter light of FATO(Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, runway, flight path Lighting, etc. The emitting color is green or yellow or white or blue.
Compliance
l ICAO Annex 14 Volume ǁ Heliports 5.3.
l FAA AC 150/5390-2B Heliport Design Guide
Features
Electrical
l LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light
l Power supply available in AC(110-240VAC), DC48V
Physical
l Pressure resistance lens allowed the vehicles go through on light
l Die-casting aluminum covered by black hard anodizing layer have good corrosion protection and load bearing
l IP68 waterproof ensure light work fine underground
Optional
l Infrared LED for pilot using NVG(Night Vision Goggles)
l Controller for power supplying and turn ON/OFF light
l VHF pilot to ground remote control
l Marine treated
Application
l Helipad/Heliport TLOF areas
l Heliport FATO ares
l Helipad Runway
l Helipad taxiway
l Aiming point light
Application:
This product is used for shining Omnidirectional white or green or yellow light at night or in the daytime with poor visibility to provide good visibility and circling guidance.
Specifications:
| SPECIFICATIONS | FATO Inset Perimeter Light |
| Light Characteristics | |
| Light Source | LED |
| Available Colors | Green or yellow |
| Intensity(cd) | ≥100cd |
| Horizontal Output(degrees) | 360 |
| Vertical Divergence(degrees) | >10 |
| Reflector Type | Fresnel Lens |
| Flash Characteristics | Steady-burning |
| Operation Mode | Dusk-to-dawn Automatically as standard. 24hours operation as option. |
| LED Life Experience(hours) | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | AC220V, 50/60 Hz (Option voltage, eg.AC120V,DC48V) |
| Power(W) | 20 |
| Circuit Protection | Integrated |
| Temperature Range(℃) | -55~70 |
| Physical Characteristics | |
| Body Material | Polycarbonate |
| Base Material | aluminum |
| Mounting | Φ199 by 146 |
| Height(mm) | 194 |
| Width(mm) | 194 |
| Depth(mm) | 138 |
| Mass(kg) | 4.9 |
| Product Life Expectancy | 5 years plus |
| Environmental Factors | |
| Humidity | 10%-95% |
| Wind Speed | 80m/s |
| Waterproof | IP68 |
Dimension Drawing
Product Picture
