|
[China]
Trade Verify
Address: Room 801, Building 1, Shenzhen Halcyon New Materials Co.,Ltd. No. 6, Jinlong 1st Road, Baolong Community, Baolong Street, Longgang District, Shenzhen,Guangdong Province, PRC 518118
Contact name:Alice
SHENZHEN ANHANG TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
White High-intensity Type A LED Aviation Obstruction Light for Tele
Tower
Specification
• The house of the light adopts Aluminium alloy, Lens of Tempered
glass; the structure is high strength,
resistance to corrosion
• Use the optical design of parabolic reflector, the visual range
further and angle more accurate.
• Light source adopts high quality LED which are light efficiency
100LM/W, low power consumption, long
lifespan up to flash 100,000 Hrs
• Based on the single chip computer control, automatic
identification sync signal, do not distinguish the main
light and auxiliary light, and also could be controlled by
controller.
• Same power supply voltage with synchronous signal, integrate in
power supply cable, emliminate the damage
by error installation caused.
• Used the photosensitive probe fit for the natural light spectrum
curve, automatic control light intensity level.
• The circuit of the light has surge protection whose lightning
proof ability is In 7.5KA/5 times, Imax 15KA so that
the light is suitable to harsh environment.
• Integral structure, protection lever of IP65.
• Ignitability rate UL-94V0, fit for all kinds of industrial
situation .
• GPS synchronizing function is available.
Detail Description
Single light with photocell, so it can work all day
and automatically change light intensity according to ambient
brightness by photocell. When ambient brightness is less than
50cd/m2,light intensity is
2,000cd(±25%);When ambient brightness is between 50cd/m2
and 500cd/m2,light intensity is 20,000cd(±25%) ;When ambient
brightness is more than 500cd/m2,light intensity is
200,000cd(±25%). All control signal wire of light is
paralleled to make several lights flash synchronously.
Application:
This product is mainly used on the top of Television transmitting
tower, High-rise building, High chimney, cable stayed
bridge,,communications Tower, Cooling tower, etc which height
is over 150meter so that it can play a warning role
in potentially hazardous obstructions to air traffic flashing
white safety light.
Specifications:
| SPECIFICATIONS | AH-HI/O High-intensity Type A Aviation Obstruction Light |
| Light Characteristics | |
| Light Source | LED |
| Available Colors | White |
| Intensity(cd) | -2,000cd (Night) |
| Horizontal Output(degrees) | 360 |
| Vertical Divergence(degrees) | 3 to 7 |
| Reflector Type | Fresnel Lens |
| Flash Characteristics | (40-60times/minute) |
| Operation Mode | Dusk-to-dawn Automatically as standard. |
| LED Life Experience(hours) | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | AC220V (option |
| Power(W) | 150 |
| Circuit Protection | integrated |
| Temperature Range(℃) | -55~70 |
| Physical Characteristics | |
| Body Material | High borosilicate glass |
| Base Material | die casting aluminum |
| Mounting | 180 by 180 by Φ12 |
| Height(mm) | 256 |
| Width(mm) | 256 |
| Depth(mm) | 440 |
| Mass(kg) | 23 |
| Environmental Factors | |
| Humidity | 10%-%95 |
| Waterproof | IP67 |
| Compliance | |
| ICAO | High-intensity Type A Aviation |
| FAA | High-intensity Type A FAA L-856 |
Dimension Drawing
Product Picture
