|
[China]
Trade Verify
Address: Zone D, 3 / F, Building A, Zhentai Industrial City, No. 4 Jiangbian Industrial First Road, Songgang Street, Baoan District
Contact name:Yolanda
Shenzhen Yizhuo Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
HASL LED SMD 3030 5730 Prototype PCB Assembly Custom Thickness
Excellent Aluminum board panels custom thickness 3030 5730 led PCBA
Technical Specification |
Minimum line width/gap:3.5/4mll(laserdrill) Multilayers:0.40-4.0mm, Min Solder Mask Bridge:0.08mm Aspect ratio: 8: 1
| |||
What is Aluminum PCB?
Aluminum PCB is the PCB type that used the low alloyed Al-Mg-Si with high plasticity alloy plate as the substrate material that has better thermal conductivity, electrical insulation, and machining performance, compared with the traditional FR4 PCB.
Similar to other types of PCBs, Aluminum PCB is structured by the conductive layer (copper layer); insulation layer (dielectric layer); and the substrate layer.
Aluminum PCB is capable to stand higher current with the same thickness and line width. Aluminum PCB is able to withstand voltage up to 4500V and thermal conductivity is more than 2.0. At present, aluminum PCB is the most common type for LED lighting PCB applications.
Common LED PCB has two sides. The top side with white solder mask is used for soldering SMD LED beads, and the other side normally has no solder mask and showing as aluminum metal color. If there is a demand for high-power heat dissipation, the aluminum base can also be coated with a thermal conductive silicone grease layer to connect with the installed heatsinks for better heat dissipation.
FAQ:
Q1. How do O-Leading ensure quality?Our high quality standard is
achieved with the following.
A. 1. The process is strictly controlled under ISO 9001:2008
standards.
2. Extensive use of software in managing the
production process
3. State-of-art testing equipments and tools. E.g.
Flying Probe, X-ray Inspection, AOI (Automated Optical Inspector)
and ICT(in-circuit testing).
4. Dedicated quality assurance team with failure case
analysis process
5. Continuous staff training and education
Q2: How about the Shipping cost?
A: The shipping cost is determined by the destination, weight, packing size of the goods. Please let us know if you need us to quote you the shipping cost.
