250MM Blade Hook and Loop Tape Cutting Machine YS-250W

Intro:

YS-250W is a multi-functional webbing tape cutting machine. It can cut webbing tapes within 250mm width. Machine can cut various materials, such as hook and loop tape, elastic, shrink sleeves, film, etc. With LCD display, operator can set length, quantity, speed, and operate machine easily.  After puting materials onto machine, no need operator. It will cut and stop automatically when material cutting is finished.

Below is our machines models

YS-100/100W for cutting plastic film with max 100mm width

YS-160W  for cutting plastic film with max 160mm width

YS-200W  for cutting plastic film with max 200mm width

YS-250W  for cutting plastic film with max 250mm width

YS-300W  for cutting plastic film with max 300mm width

YS-400W  for cutting plastic film with max 400mm width

YS-500W  for cutting plastic film with max 500mm width

Suitable:

For cutting plastic film or other tube, tape products.

Available width 0-500MM, or bigger

Cut length: 0.1-9999MM

Parameters

Features of tube cutting machine

1.High speed: It can cut 100~120 cut per minute. (50mm long)

2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.

3.Cutting type: Both for cold cut and hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.

4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.

5.Automatic stopper: It stops automatically if materials run out during operation

6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on

7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.