Manual Single-Side Belt Component Lead Cutting Machine, Tape-Packed Capacitor Pin Cutting machine

Intro:

RS-902 is manual type radial lead trimming machine. It works for taped radial components with 12.7mm or 15mm tape pitch, taped capacitor, led, transistor, varistor and more. 

Suitable:

• It is used to cut radial leads of the unilateral taped radial components. (roll-/box-packaged)
• For 12.7 or 15MM pitch. Note: 12.7MM and 15MM pitch can not share same machine
• Can cut leads shortest to 2.5MM
• Can cut leads only, it can not form leads.

Parameter:

Manual unilateral taped radial components lead/leg cutting machine

Key features:

• Manual single-side taped radial lead/foot cutting machine, for taped capacitor,led,etc
• For roll-packed/box-packed taped radial components. Tape hole distance: 12.5mm or 15mm(can not be shared)
• Imported material SKD-11 for blades. Durable
• Small in size, accurate cutting lead, cut shortest to 2.5mm/3mm(if shorted than 2.5mm, need customized)
• Easy operation, simple maintenance
• Manual machine avoid being affected by external factors(Such as power-off)
• Efficiency depends on operators' proficiency
• Taped Lead Cutting Machine Pictures