Auto Liquid Adhesive Glue Filling Machine With Ratio Mixing System
Intro:
Automatic glue filling machine is generally used for AB
two-component glue. It uses precise gear metering pump or screw
pump to measure, extract and mix according to the specified ratio.
An automatic machine that drips, coats, and pots liquid on the
surface or inside of the product to make it a device for sealing,
fixing, and waterproofing.
Suitable:
Mainly widely used in the automotive electronics industry, LED
industry, handicraft industry. Suitable for various proportions of
epoxy resin or polyurethane,
Efficient potting of crystal glue; it has also been widely used in
other industries.
Traditional manual glue filling has many disadvantages:
1. Completely manual operation, inaccurate mixing ratio, uneven
glue amount, resulting in defects such as non-drying of the glue,
which reduces the qualified rate of the product.
2. The manual filling speed is slow and the output cannot be
raised.
3. Manual recruitment and management are difficult.
4. The waste of glue caused by pure artificial is large.
Available glue:
Suitable for various proportions of epoxy resin or polyurethane,
Efficient potting of crystal glue
Features:
- 1. 5. 7-inch touch screen operation, can be equipped with computer
operating software, can draw CAD pictures, can be operated by a
single machine, easy to learn and understand;
2. It has the functions of continuous interpolation of points,
lines, surfaces, arcs, circles, irregular curves, and three-axis
linkage, which can adapt to any irregular object filling;
3. The hard disk has a large storage memory capacity, unlimited
storage of programs, no need to reprogram, and the software has
functions such as area array, translation and rotation calculation;
4. The glue volume, glue speed, glue dispensing time, and glue stop
time can all be parameterized, the glue output is stable, and glue
is not leaked;
5. The three functions of glue dispensing, glue filling and track
potting are integrated and fully automated;
6. Proportioning according to needs, realizing glue filling while
mixing, saving glue to the greatest extent;
7. Glue A and Glue B are stored separately to ensure that the glue
does not solidify after being placed for a long time;
8. Dynamic or static mixing can be used, mixing uniformly and
fully;
10. Unique control system, not affected by air pressure, avoiding
uneven glue output, wire drawing, bubbles, etc.;
11. The Z-axis height adjustment device can adapt to the work of
different heights;
1 3. Optional glue mixing, heating and reserved vacuum defoaming
function, suitable for different types of infusion processes
Technical Parameters:
Mixing ratio | 1: 1-1: 10 Adjustable |
Glue filling speed | 0.5-15 g adjustable (according to glue characteristics) |
Glue filling accuracy | Glue amount ±2% Proportion: ±2% |
3 axis working area | 300x300x100MM (can be customized) |
Glue viscosity | <=2000CPS |
Operation mode | Manual Or automatic |
Glue ratio mixing | Pump measurement |
Programming method | Teaching programming |
Mixing system | static/dynamic mixing |
A pump | gear pump/screw pump |
B pump | gear pump/screw pump |
Pressure tank | 10L, 20L, 30L optional |
A B plastic bucket mixing | Optional |
A B plastic barrel heating | Optional |
Defoaming function | Optional |
Washing bucket capacity | 5L |
Power voltage | 220V/110V 50HZ/60HZ |