RKENS TECHNOLOGY CO.,LTD |
|
This machine is for packed Two components glue. There is a cylinder to push AB glue to mixing tube.Dispensing valve is used to control the glue quantity. The glue will flow to dispensing needle, and dispense to required area. The dispensing speed and quantity can both be controlled well.
The robot can be programmed by the LCD dispaly. Also operator can connect it to PC for programming.
Suitable:
The glue dispenser is mainly used to accurately point, inject, apply and drop glue, paint and other liquids in the product process to the precise position of each product. It can be used to achieve dots, lines, circles or arcs.
Available glue:
Glue dispenser suitable for fluids as follow : Solvents ,adhesives,oil paint,chemical materials,solid gum ,silicon , EMI conducting resin ,UV glue, AB glue, quick-drying glue, epoxy glue, polyurethane adhesive, sealant, hot glue, red glue, solder paste, acrylic adhesive, adhesive wear, crystal glue, glue, horn glue, instant glue, rubber, paint, enamel paint, lacquer, printing ink, paint.
Model | YS-D331-X | YS-D441-X | YS-D551-X |
Working area(X/Y/Zmm) | 300x300x80 | 400x400x80 | 500x500x80 |
Drive Mode | Stepping motor + silver guide rail + timing belt | ||
Max. Speed | 500mm/sec | ||
Resolution | 0.01mm | ||
Repeatability | ±0.02mm-0.05mm | ||
Display | 5.7’ LCD | ||
Drive mode | Micro Stepping Motor | ||
Air Source | 0.4—0.7Mpa | ||
Power | 220V /110V 50HZ/60HZ | ||
Max load | X: 10KG, Y:10KG Z:10KG | ||
Program mode | Touch screen or computer file input / can be equipped with computer operation | ||
Program record capacity | File format save, the number of files is not limited, the total capacity is 16M | ||
I/O Signal | 16 In puts/16 Out puts | ||
Working enviroment | Temperature:5-40 degrees Celsius Humidity:20-90%RH | ||
Size(L*W*H) | 460x450x480mm | 560x550x500 | 660x650x550 |
Weight | 35KG | 45KG | 55KG |